Soda-machines section

[Jim]

Hello,

Just a note for everyone: the Quikold Section in the Soda Machines Section has been updated to include several new listings...
I recommend viewing the V-100 as I have never seen an upright model manufactured by Quikold or S&S for that matter, since it's the parent company.
 

[Eric]

Jim if you'd like I can get you a picture of my 7up junior for an example she's not the prettiest
but it's straight and would be something till I restore it then we could update it....Also goes for my Dole Delux and Super and a Multiplex dispensers the 2 Doles are nice... just let me know and I'll
take some nice pictures for you.

[Jim]

Eric,

I would appreciate the photos very much!
All I ask is that you get the complete machine/cooler/dispenser in the photo.
Additionally, I have included a short giude that I send to someone submitting photos:

Quote

May I make a few suggestions strictly on behalf of our visitors. This will result in a better displaying image for our visitors on the Web Site. Take a picture from the front of the machine/cooler but slightly to one side, just enough to see the side of the machine/cooler.  Keeping in mind to get the complete machine/cooler in the frame fully. Try to take the photograph at a point approximately 3/4 of the height of the machine/cooler.  If your machine/cooler is about 5' tall, camera height should be around 3 1/2' - 4' from the same ground the machine/cooler is sitting on. The only exception to this rule would be Chest Type Coolers in which case you would do as above except don't use 3/4 the height.  It would be better to take a picture from slightly above the Cooler to show the lids as well. And as always, don't rely on flash photography.  If the machine/cooler is in doors, try to illuminate the area as best as possible to assist the flash.  Many times pictures taken with the flash alone are very dark in some areas while very light in others.  These photos are difficult to work with for display purposes on Soda-Machines.Com