SMC Discussion Areas
November 27, 2024, 10:04:54 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Soda machines - operate or decorate?  (Read 6200 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: August 01, 2006, 03:04:01 pm »

Unlike my jukeboxes and pinball games which remain turned off most of the time, soda machines were designed to run all the time.  Do most people leave their machines on all the time?  Do these machines draw a significant amount of energy?  Do they vary in terms of noise levels or are most of them quiet (like a home frig).  I'm not sure if this is a dumb question.  I also concerned about condensation - my CS-72 is going in a basement gameroom with carpet.  Should I place a board underneath the machine?   '<img'>
Logged
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #1 on: August 01, 2006, 04:38:04 pm »

All of my machines have working cooling systems, however I only run them a few hours each month to circulate the oil in the compressors. Once in a while I'll run one for a month or more with some bottles in it, but once I drink them and don't have more to put in.. off it goes and hibernates..  Some run very quite, some make some noise,, but that is just some fine tuning I have to do with Fan Blade mountings, vibration control and Thermostat adjustments. I am eager to read what others say....
Logged

Soda Machine Enthusiast since 1996!
dr galaga
Soda Jerks
*****
Offline Offline

Posts: 2346


Sorry, but it's a POP MACHINE!


WWW
« Reply #2 on: August 01, 2006, 05:18:45 pm »

Quote (collinsf @ Aug. 01 2006,4:04)
Do most people leave their machines on all the time?

I leave my machine on all the time.

Quote (collinsf @ Aug. 01 2006,4:04)
Do these machines draw a significant amount of energy?

Not anything noticable.  We already have a fridge, freezer and dehumidifier.  A machine is the same as one of these.

Quote (collinsf @ Aug. 01 2006,4:04)
Do they vary in terms of noise levels or are most of them quiet (like a home frig).  

Most are not that noisey.  You hear it click on and then the sound just fades away.  You probably do not want to put it in an area that you want to be quiet.

Quote (collinsf @ Aug. 01 2006,4:04)
I also concerned about condensation - my CS-72 is going in a basement gameroom with carpet.

Just as long as there is a drip pan you are okay (you will almost always get a little condensation).  If it was going to be outside in the humidity and sun you will see some leaking, but as long as it isn't this way in your house you should be a-oh-kay.

 ':drinkers:'
Logged

Brent
--------------
Cavalier CS-80C
Vendo 63
--------------
The ultimate glass bottle soda site: www.GlassBottleSoda.org
My gameroom: Arcade80s.net
bubba
Soda Jerks
*****
Offline Offline

Posts: 3021



« Reply #3 on: August 01, 2006, 07:35:06 pm »

I run 3 square top machines all the time. 1 indoors in the basement (with my luck it is also my loudest compressor '<img'>  ), one in the garage, and one on the patio. None of them leave any water under them. I do have drip pans in all, and they evaporate quick enough. My 3 are all spec'd to draw about 6amps, but that is only when the compressor is on. Otherwise, the draw is minimal.
Logged

Ken

V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
sodaworks
Soda Jerks
*****
Offline Offline

Posts: 3532



« Reply #4 on: August 01, 2006, 09:33:17 pm »

If you replace the fan motors then the draw will be minimal.
Logged

TERRY@SODAWORKS RESTORATIONS
Lots of Round Top machines
Buy-Sell-Trade-Restorations
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #5 on: August 02, 2006, 11:19:09 am »

Wow Terry, that makes sense. Worn bearings require more energy besides being loud.
      Never thought about that,      thanx
Logged

Glen
Skeleton Man
Soda Jerks
*****
Offline Offline

Posts: 692


WWW
« Reply #6 on: August 03, 2006, 02:38:34 pm »

I've never measured the current draw on my machine..  I'd say at least 6A with the compressor and both fans running, and probably 1 or 2A with just one fan running (I have a lot of other stuff on the same circuit so when I have it plugged in for testing, the thermostat is turned down so the compressor never kicks in).
Logged
Pat Pixley
Guest
« Reply #7 on: August 03, 2006, 03:25:40 pm »

I have run a machine all year round  sence 1997 with my first
 machine. It like Brett said I have central Air ,freezer , fridge and a dehumidifier what one machine going to do.(if working right)

 Pat




Logged
Kevin C
Soda Jerks
*****
Offline Offline

Posts: 971



« Reply #8 on: August 03, 2006, 03:56:05 pm »

Hello

At home in garage I run the V126 all the time & it sweats a lot this time of year. So I run a heated condensation pan to help evaporate the water.

One time I had 3 machines running in the garage & the electric bills for the house did seem higher. So now I just run the V-126 ( loaded with 1 row 12 oz gatorade, 2 rows dosani 16 oz water, 3 rows of cream soda, 7 rows of long neck beers)

I will use the Ideal 55 for parties or holidays because it does the best job getting beer to a nice cold drinking temp.

Here at my office I run a V-63 (Red Bull) all the time & the Royal 650 with a timer to shut it off between 730 pm & 630  AM.  The Lance machine stays on-line all the time.

Kevin




Logged

Vendo 63-C   On the job
Vendo 56   Going back together
Vendo 56-C    Waiting for rehab!
Vendo 126  Rough outside but loaded & operational
Vendo 110  Under repair
Ideal 55 -  **For Sale make offer
Glasco 55 -  Waiting
Royal 650  On the job
Lance Snack Machine - On the job
cormy
Soda Jerks
*****
Offline Offline

Posts: 542



« Reply #9 on: August 04, 2006, 10:59:04 am »

I have several old restored machines in my gameroom and almost never turn them on. I tried to make it a point since some haven't been on in a year or more. I wonder why I went to the trouble (and expense) to redo the cooling when I don't use them. I used to bottle my own and use my VMC 44 at parties, people really got a kick out of it esp. young kids. My sister used to call them "Botulism bottles " when her kids were using the machine. We moved about 8 months ago and all my stuff is in the basement, maybe I will get my room together this winter. '<img'>
Logged

cmc
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!