SMC Discussion Areas
December 04, 2021, 10:00:44 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: LaCrosse Cooler Co. Model 81  (Read 8729 times)
0 Members and 1 Guest are viewing this topic.
audiobeer
Soda Jerks
*****
Offline Offline

Posts: 592



« on: November 25, 2001, 12:21:07 am »

Quote from csde, posted on Nov. 24 2001,8:44
Thanks for the info . The machine worked great when I purchased it . Know that the unit is cool it will not release bottle . I don't believe that coil is pulling in all the way to release bottle . I haven't been able to find any parts or a place to get parts . If you could help me get this fixed it would be great !!!! '<img'>


You say it won't work when it's cool? I know this is going to sound stupid....but  live in an area where the humidity is very high. In addition to that factor I like my longnecks cold. This combination causes the bottles to freeze on the rack. Could this possibly be what is happening to yours?
Logged

Missouri
Guest
« Reply #1 on: October 31, 2001, 05:29:48 pm »

The machine cools great ! General condition is better than good but not great . It has a problem with giving up its cargo after one pays for it . Hoping to fix that .blush
Logged
Guest
« Reply #2 on: November 28, 2001, 04:18:26 pm »

No this isn't what is happening but, it would be nice if it was the problem . When the unit is not chilled the coil pulls in to release the bottles , but when unit is up to temp it will not pull in coil . I believe that I might have a open coil and when it is warm or unit isn't cold the coil generates enough heat to close the circuit . I may possibly even have a bad wire doing the same . I thank you for the help . Do you know of any places that I could get parts ? '<img'>
Logged
audiobeer
Soda Jerks
*****
Offline Offline

Posts: 592



« Reply #3 on: November 15, 2001, 10:03:09 pm »

It's very common in my area. Maybe $300 for a clean one. What problems are you having with the dispensing?
Logged

Missouri
audiobeer
Soda Jerks
*****
Offline Offline

Posts: 592



« Reply #4 on: November 30, 2001, 11:15:34 pm »

Funtronics and others that advertise here. You could just take a liitle nylon zip strap and force the unit in a free pay position!
Logged

Missouri
Guest
« Reply #5 on: November 24, 2001, 08:44:06 pm »

Thanks for the info . The machine worked great when I purchased it . Know that the unit is cool it will not release bottle . I don't believe that coil is pulling in all the way to release bottle . I haven't been able to find any parts or a place to get parts . If you could help me get this fixed it would be great !!!! '<img'>
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!