Newbie needs help identifying pepsi machine

[KreKol]

I have one also.  Very well built machines.  I paid $49.25 for mine (I found .75 in quarters inside the machine '> ).

More pictures. I tried to get a picture of the ID plate on the side, but always came out too blurred to get. I will have to move machine so I can get it later.


You guys are way ahead of me so I am sure somone already thought of this but Here is what I did. Did google image search for rootbeer, icehouse, strawberry ETC. Downloaded and resized if needed.

Then went to walmart and bought a roll of magnetic tape and cut about a two inch peice and then stuck a label on each peice.
The magnetic tape has a sticky side so it made it easy.

That way I can move them or change them depending on what I
have in each department. Also the original labels are left in tact undernath.

some more


I couldnt find the right size bulb for behind the main light up logo, so I picked up a kitchen fixture and wired into it. I kept the original guts so I can replace with original if I ever want to. I like this though because it has an off/on switch if I dont want light on 24/7

'>

I am thinking of buying this from someone over the internet. anyone use thos or bought this. It will enable me to vend for free at the push of a button. Pretty cool. I believe I foiund this on this site somewhere.

Bottom picture just the side logo.


Thanks for all your enthusiasm and help too.
Hank

[BryanH]

Hank - for about $8 you can make your own free vend switch.  Directions in the coin mech area. It's a sticky so it's always on top of the list or just click here.  There's also a good link on where / how to mount the switch here.

Quote (BryanH @ Nov. 21 2005,2:57)

Hank - for about $8 you can make your own free vend switch.  Directions in the coin mech area. It's a sticky so it's always on top of the list or just click here.  There's also a good link on where / how to mount the switch here.

Ok I made the switch but have a few questions. I posted over on the sticky topic you posted. receptacle 7 has no prong.

 
 '>

Hank

[KreKol]

I have two Philips F13½T8/CW florescent bulbs in mine.  About $10 each.  I had to go an electoral shop to get them.

Ok I skipped the small jumper wire and it seems to work fine with or without the coin mechanism too. Thanks guys.  '>