Vendo 63 cooling system schematic

[BryanH]

Robert... if you want the diagram for your machine, you can buy them from Funtronics as tags that were tied to the compressor.  They're about $5.

Hey Guys thanks for all the help! I have finally gotten a chance to mess with this thing again. I've been using johnieG's schematice, and have been tracing the rotted wiring thats left in the machine. So I modified his schematic to show what I have, because its slightly different, and I wanted to check the connection I was gonna make was right first. ON the relay there are there terminals 2 that connect to posts on the side of the compressor, and one that does connect to anything currently. Is this where the hot wire from the thermostat connects? Also the overload breaker is hooked to another seperate post is this configuration correct?

Thanks for all your help guys!

Robert

[Creighton]

Can't help but just wanted to say nice drawing and welcome to the board!!
Creighton

Thanks for the welcome! Wish I could take credit for the drawing. I just editted johnieG's.

Thanks
Robert

[sodaworks]

Welcome aboard giftedone