SMC Discussion Areas
March 28, 2024, 08:18:26 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Tamper resistant screws  (Read 5438 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: July 19, 2002, 01:04:53 pm »

Anybody know where to get a screwdriver or bit to remove the tamper resistant screws on a 60's vendorlator machine? kind of a rectangular hole with a slight  radius on the ends.
Logged
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5868


#1 Soda Jerk!


WWW
« Reply #1 on: July 19, 2002, 06:37:08 pm »

It's called a Clutch Bit and they come in different sizes.
Usually you can find these at a decent hardware store or possibly Home Depot/Lowes...
Logged

My six cents,

Jim

johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #2 on: July 19, 2002, 08:53:44 pm »

Jim's correct, you can find them at Sear's hardware too, I got my set (all three size's) at my local electrical suppier, say is anybody stocking these little buggers? (the clutch-head screw's) I've been using stainless steel philips to replace them for now, just hoping sombody still makes 'em, so if you know of any supplier please post them!!!
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pat Pixley
Guest
« Reply #3 on: July 19, 2002, 11:05:56 pm »

Both Jim & johnie are  right  I got my set at a True Value
hardware . Home Depot also has them and Ace has them.

Pat P. ':cool:'




Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!