Vendo lock

Kevin C

Soda Jerks

Offline

Posts: 971

Vendo lock

« on: June 20, 2005, 02:39:30 pm »

Hello

How do you remove the back retaining nut on the coin door lock? Two of my machines I had to drill the locks off & the whole lock came right apart because I could remove the slide lock bar. Now I have two machines with (V126-V56) that have complete locks but I cant remove the back nut because the slide bar is in the way. Is there a special wrench?

Let me know

Kevin


	Logged

Vendo 63-C On the job
Vendo 56 Going back together
Vendo 56-C Waiting for rehab!
Vendo 126 Rough outside but loaded & operational
Vendo 110 Under repair
Ideal 55 - **For Sale make offer
Glasco 55 - Waiting
Royal 650 On the job
Lance Snack Machine - On the job

jasmine64

Soda Jerks

Offline

Posts: 1036

Vendo lock

« Reply #1 on: June 20, 2005, 02:59:42 pm »

If yours is like mine, I just inserted a screwdriver near the top of the slide bar and nut and applied a little pressure it slid up just a little way and I was able to
get the screwdriver in there and remove the other screws.

Post a pic, this way i'll know if i gave you accurate info or not.


	Logged

Marsha

Cav. CD 22
Choice Vend 168 - Use daily.

Kevin C

Soda Jerks

Offline

Posts: 971

Vendo lock

« Reply #2 on: June 20, 2005, 04:28:49 pm »

Hey

The home computer is belly up right now so no pictures. This is not a screw but the large nut that holds the lock barrel in place.

Kevin


	Logged

Creighton

Global Moderator
Soda Jerks

Offline

Posts: 4938

Vendo lock

« Reply #3 on: June 20, 2005, 04:35:15 pm »

Kevin,
Just remove the cam first. Its a close fit you just get a small turn. Give it some Liquid Wrench or oil and you may be able to spin it off with your fingers. Or just take the slide out of the way. It's just a couple of cotter keys on mine.
Creighton


	Logged

Pages: [1] Go Up

« previous next »

	Author	Topic: Vendo lock (Read 3148 times)
0 Members and 2 Guests are viewing this topic.