SMC Discussion Areas
December 10, 2024, 07:08:01 am
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Home
Help
Login
Register
SMC Discussion Areas
>
Trouble-Shooting
>
Refrigeration
(Moderators:
johnieG
,
Jim
) >
question about compressor
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: question about compressor (Read 2411 times)
0 Members and 1 Guest are viewing this topic.
scottransell
Newbie
Offline
Posts: 11
question about compressor
«
on:
November 16, 2023, 09:08:51 am »
I have a Ideal slider the compressor worked fine until now and when I had the refrigerant guy out to test it they found a leak in the wall, so after removing all the panels I found a hole in the tubbing, which is no big deal. I ran the compressor for a day with no freon in it, the compressor wasn't hot, so my question is after fixing the hole and recharging the line should the compressor be fine running the day with no freon in it or will it be toast and need to be replace.
Any help would be appreciated
Logged
MrMark
Newbie
Offline
Posts: 35
Re: question about compressor
«
Reply #1 on:
November 16, 2023, 09:39:58 am »
Assuming the compressor still runs - you can take your chances and have it evacuated and recharged, and cross your fingers.
It’s never, ever, a good idea to run a compressor without refrigerant - any oil vapor produced gets pumped into the condensor where it lays and ultimately starves the compressor of oil.
Normally, refrigerant flow carries the oil with it to return to the compressor.
Good luck!
Logged
scottransell
Newbie
Offline
Posts: 11
Re: question about compressor
«
Reply #2 on:
November 16, 2023, 11:59:47 am »
thanks, and that is what I was thinking. chance it out as a new compressor would be worth more then its worth. appreciate the advice
Logged
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
The Coin Return
-----------------------------
=> Soda-Machines.Com News
=> Other Coin-Op's
=> General Chit Chat
=> Estimated Values
=> Tutorials & Tips
-----------------------------
Soda Machines, Coolers & Dispensers
-----------------------------
=> Pre 60's Machines & Coolers
=> Post 60's Machines & Coolers
=> Picnic Coolers
=> Syrup Dispensers
-----------------------------
Trouble-Shooting
-----------------------------
=> Coin Mechanisms
=> Refrigeration
=> Vending Mechanisms
-----------------------------
Restorations
-----------------------------
=> General
=> Refinishing
-----------------------------
The Vending Rack
-----------------------------
=> Swap Meet Area
Loading...