SMC Discussion Areas
December 04, 2021, 09:52:37 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: VEND MOTOR & CAM POSITION  (Read 726 times)
0 Members and 1 Guest are viewing this topic.
FOWL1
Newbie
*
Offline Offline

Posts: 1


« on: May 18, 2020, 11:43:46 am »

HI, I'M NEW TO THE FORUM.  i'VE BEEN SEARCHING FOR THE PROPER POSITION OF THE VEND MOTOR ON MY MACHINE.  IT IS A SQUARE TYPE AND HAS A SINGLE VEND MOTOR.  IT LOOKS ALMOST IDENTICAL TO TERMITE'S DR PEPPER MACHINE IN THESE 2 POSTS.  MINE IS A PEPSI MACHINE AND VENDS CANS, BUT MAY HAVE AT ONE TIME DID BOTTLES BECAUSE IT HAS A BOTTLE OPENER ON IT & SAYS "NOW SERVED IN CANS" ON IT.  


http://soda-machines.com/discussions/index.php/topic,21022.0.html          AND    http://soda-machines.com/discussions/index.php/topic,21007.0.html




I HAD TO REPLACE THE SMALL GEAR IN THE GEAR BOX AND HAVE DONE THAT.  i CAN'T SEEM TO GET THE TIMING RIGHT ON THE DROP.   DOES ANY BODY KNOW HOW THE GEARS, CAMS & DROP MECHANISM IS SUPPOSED TO BE SET TO DROP 1 CAN AT A TIME?  i GOT IT TO DROP 3 AT A TIME OR NONE.    

I FORGOT TO ADD THAT THE MACHINE WAS VENDING FINE PRIOR TO PULLING THE VEND MOTOR AND INSTALLING THE NEW GEAR.  i REPLACED THE GEAR BUT DIDN'T MARK THE POSITION OF THE DROP BARS OR MOTOR WHEN I TOOK IT OUT.  IT LOOKS LIKE THERE IS A TIMING MARK ON THE DROP CAM, BUT i DON'T KNOW WHAT IT IS SUPPOSED TO POINT TO AND THE CAM THAT THE MICRO SWITCH RUNS ON MIGHT NOT BE IN THE RIGHT POSITION.  THANKS.








« Last Edit: May 18, 2020, 12:22:31 pm by FOWL1 » Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!