SMC Discussion Areas
March 28, 2024, 10:39:07 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: looking for mechanical help in FL  (Read 3661 times)
0 Members and 1 Guest are viewing this topic.
csiwannabe
Newbie
*
Offline Offline

Posts: 23



« on: February 26, 2020, 09:33:11 pm »

I apologize up front if this is not the right venue, but I am looking for some assistance with my Auto Bell flasher style slot machine.  It has been working fine, but now when I plugged it in, it is in "TILT" mode and won't accept coins.  Lights are fine and "spinner" handle moves freely. 

I'm looking for any recommendations you might have for someone in FL who does service/repair on slot machines/arcade/pinball. 

Thanks!

I'm attaching a couple of pictures.
Logged

Cavalier C-33 - original
Vendo 83 - original
U Select It square top - restored (amateur)
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: February 26, 2020, 09:45:56 pm »

I’d check the actual Tilt switch & look for a short between the contacts or a loose/broken wire ( I’ve zoomed in onto the picture of the tilt switch). also check the Tilt latching relay, it should release when you power-cycle the machine & release the “Tilt”  Unless this switch is stuck Or shorted
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #2 on: April 02, 2020, 07:34:32 pm »

So,     csiwannabe...did you ever figure it out?
« Last Edit: September 17, 2020, 08:53:55 pm by johnieG » Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
davethebirdman
Soda Jerks
*****
Offline Offline

Posts: 3162



« Reply #3 on: April 03, 2020, 06:08:06 am »

I guess it fell into the too difficult box.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #4 on: September 18, 2020, 03:10:17 pm »

I guess it fell into the too difficult box.

Just revisiting an old topic...just curious if it ever was repaired.

But unfortunately my "feeding spoon" for newbie's only reaches just so far...

either that or he's electrocuted himself into a Coma...  wow   ( hopefully not)
« Last Edit: December 17, 2020, 04:27:30 pm by johnieG » Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!