SMC Discussion Areas
August 15, 2020, 12:16:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: thermostat probe location  (Read 505 times)
0 Members and 1 Guest are viewing this topic.
Greg Long
Newbie
*
Offline Offline

Posts: 4


« on: January 13, 2020, 10:09:24 AM »

I am working on a Cavalier machine and ran across an odd cooling problem. The machine would not get cold enough, cutting in and out too quickly, no matter where the t-stat was set  Tried 2 NOS Cavalier t-stats with the same results. T-stat probe was is in the evaporator coil, in the tube as all Cavalier machines I remember are.
Just for an idea, I pulled out the probe and placed  it about 2 inches away and instantly stopped the on/off problem and the temperature went down 6* with the T-stat set on about 4.
Any insight on this is welcome, Thanks in advance.   Greg
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!