Faygo VF56 repair

[johnieG]

or more like this one?

[Slapshot42]

Yes

[johnieG]

Yes

LOL, Funny...

so the first or the second?  before I don't care anymore..  



And now, a word from our Fearless Leader... ( in case you've ever wondered about my little Avatar...)


https://www.youtube.com/watch?v=o3nfyOiItbc

 

[Slapshot42]

The pigtail harness with white molex connector.  Did you just re use it?

[johnieG]

The pigtail harness with white molex connector.  Did you just re use it?

The picture shown is a Compressor deck that's in my shop for repair/refurbishing, I'm replacing the compressor ( it's super noisy with a broken internal vibration spring, so it sounds like a a cross between a machine-gun and a  pneumatic impact wrench when it runs  

I'm also replacing both the Evap' & Condenser fan motors,  the harness itself is in perfect shape, so yes Ill be reusing it, the white Molex style / 2-pin connector is the main 120 volt supply to the door harness.

[Slapshot42]

Thanks .  I planned to cut mine like your picture and ties those (2) wires shown back into the hot wire on the wiring harness door light wires.

[Slapshot42]

Is free play pins 1 & 3 like the diagram ?  I’m
using 16-14 male spade terminal connectors but they don’t plug into the Jones Plug on the machine .  Almost like they aren’t long enough or over time the plug has worn out ?

[MoonDawg]

    Will removing the blue plastic insulators help you to push the connectors in further?

[Slapshot42]

That was my next step ..

[Slapshot42]

Photo