|
johnieG
|
 |
« on: August 04, 2019, 09:02:01 pm » |
|
Just finishing up repairing a nice original VMC Faygo VF56, just bored so I thought I'd post some pictures, clean, rust free and straight, it's a nice example of an original machine, basically, it stopped cooling for the customer, found that the cooling system was undercharged due to a slow leak , aggravated by a condensing coil was blocked by a wall of dust/lint & pet-hair, so I power washed the lower compressor compartment ( filthy, hadn't been touch in decades ) replaced the main wiring harness ( dry-rotted), both the evap' & condenser fan motors, installed a system service valve on the low-side of the compressor, recovered what was left of the R12 & installed some poly conversion oil & added a leak stop treatment and converted it over to R134A, the compressor is in solid shape with a good current-draw, but not so the start-run relay assembly, so it also has a new 3-in-1 starter/booster,
I added a few newer options for the customer , a free play switch actuated by the coin-return lever, a LED bottle rack light to illuminate the bottles in the gates, repaired & made functional again the original EM coinmech & set it back to 10-cents, bonus was I found the original price label hiding behind a hand-written tag for 25-cents. Oh & I unplugged the condensate drain hose for the bottle compartment and installed a missing coin-door lock. & replaced the Faygo marque's lamp & installed a correct size florescent FS-5 starter so it can light the way to the Faygo red-pop (strawberry-cream soda for you out of townies)
All & all he should be pretty happy to get his machine back down into his family room & serving cold ones again. Not a complete restoration, but it's now a solid, functional refurbished machine.
|
|
|
|
« Last Edit: August 04, 2019, 09:06:04 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Slapshot42
|
|
« Reply #1 on: August 05, 2019, 12:40:05 am » |
|
Nice job!
|
|
|
|
|
Logged
|
|
|
|
|
cohammer
|
|
« Reply #2 on: August 05, 2019, 09:33:45 pm » |
|
Great to see the square tops restored
|
|
|
|
|
Logged
|
Ideal 35 RC
v 23 deluxe
v 39
c 96
c 55 e
C 51 g
C 72
C96
V 27
Westinghouse JR ice chest
Westinghouse standard ice chest
Westinghouse master ice chest
early model Stoner jr.
Stoner theaters
Thanks Jeff
|
|
|
|
johnieG
|
|
« Reply #3 on: August 06, 2019, 09:32:02 pm » |
|
Thanks, here’s the free vend switch & a pic of the cleaned deck oh look, it’s pink not scum-gray  |
|
|
|
« Last Edit: August 06, 2019, 09:35:31 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
BrianS
|
|
« Reply #4 on: August 06, 2019, 11:07:27 pm » |
|
The LED lighting in the bottle door completely changes the appearance of the machine. Really nice upgrade. I never realized these machines had side vents for the condenser fan, I thought they faced forward. Looks great.
|
|
|
|
|
Logged
|
Brian
Vendo 56 - restored
Vendo 81 - in progress
Vendo 39 - in the rough
Rockola 1428 - Original
1959 Williams Pinch Hitter
Wurlitzer 1400
1930 Koken Barber Pole
|
|
|
Devman
Newbie
 Offline
Posts: 4
|
|
« Reply #5 on: September 11, 2019, 01:44:27 pm » |
|
The LED light is a nice touch. I did the same to my VFA56ZC can machine and love the look of it! Easy to do and a cool "upgrade."
|
|
|
|
|
Logged
|
|
|
|
|
Slapshot42
|
|
« Reply #6 on: May 22, 2020, 04:08:32 pm » |
|
Do you have a wiring diagram ? Working on this machine and noticed there are molex connectors on the original wiring harness . Thanks!
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #7 on: May 23, 2020, 12:06:45 am » |
|
This one?
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Slapshot42
|
|
« Reply #8 on: May 23, 2020, 02:22:09 pm » |
|
No. The main wiring harness on the original has a molex connector coming off the hot wire .
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #9 on: May 23, 2020, 02:57:38 pm » |
|
This harness?
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #10 on: May 23, 2020, 05:27:01 pm » |
|
or more like this one?
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Slapshot42
|
|
« Reply #11 on: May 23, 2020, 07:22:06 pm » |
|
Yes
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #12 on: May 23, 2020, 09:29:32 pm » |
|
Yes
LOL, Funny...  so the first or the second? before I don't care anymore..  And now, a word from our Fearless Leader... ( in case you've ever wondered about my little Avatar...) https://www.youtube.com/watch?v=o3nfyOiItbc |
|
|
|
« Last Edit: May 23, 2020, 09:41:20 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Slapshot42
|
|
« Reply #13 on: May 24, 2020, 04:10:26 pm » |
|
The pigtail harness with white molex connector. Did you just re use it?
|
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #14 on: May 24, 2020, 05:18:16 pm » |
|
The pigtail harness with white molex connector. Did you just re use it?
The picture shown is a Compressor deck that's in my shop for repair/refurbishing, I'm replacing the compressor ( it's super noisy with a broken internal vibration spring, so it sounds like a a cross between a machine-gun and a pneumatic impact wrench when it runs  I'm also replacing both the Evap' & Condenser fan motors, the harness itself is in perfect shape, so yes Ill be reusing it, the white Molex style / 2-pin connector is the main 120 volt supply to the door harness. |
|
|
|
« Last Edit: May 24, 2020, 05:23:58 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Slapshot42
|
|
« Reply #15 on: May 24, 2020, 08:40:36 pm » |
|
Thanks . I planned to cut mine like your picture and ties those (2) wires shown back into the hot wire on the wiring harness door light wires.
|
|
|
|
|
Logged
|
|
|
|
|
Slapshot42
|
|
« Reply #16 on: June 07, 2020, 06:15:11 pm » |
|
Is free play pins 1 & 3 like the diagram ? I’m
using 16-14 male spade terminal connectors but they don’t plug into the Jones Plug on the machine . Almost like they aren’t long enough or over time the plug has worn out ?
|
|
|
|
|
Logged
|
|
|
|
|
MoonDawg
|
|
« Reply #17 on: June 07, 2020, 07:27:17 pm » |
|
Will removing the blue plastic insulators help you to push the connectors in further?
|
|
|
|
|
Logged
|
Glen
|
|
|
|
Slapshot42
|
|
« Reply #18 on: June 07, 2020, 08:06:43 pm » |
|
That was my next step ..
|
|
|
|
|
Logged
|
|
|
|
|
Slapshot42
|
|
« Reply #19 on: June 07, 2020, 08:33:30 pm » |
|
Photo
|
|
|
|
« Last Edit: June 07, 2020, 08:35:15 pm by Slapshot42 »
|
Logged
|
|
|
|
|
Slapshot42
|
|
« Reply #20 on: June 08, 2020, 12:05:16 am » |
|
The orientation of the pins threw me off a bit . Here is how it worked for me in my machine.
|
|
|
|
« Last Edit: June 08, 2020, 06:11:36 pm by johnieG »
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #21 on: June 08, 2020, 07:43:41 pm » |
|
Perhaps this drawing of the coin mechs female socket ("jone" plug) will help with your wiring issue
|
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
Slapshot42
|
|
« Reply #22 on: June 08, 2020, 08:42:26 pm » |
|
I understand the concept it’s either orientation of the plug in the machine. It’s not labeled so it was a game of guess what pins are 1& 3? Or the Jones Plug was replaced at one time and not re wired correctly .
|
|
|
|
|
Logged
|
|
|
|
|
