SMC Discussion Areas
March 18, 2024, 10:50:26 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Ideal 55 lines  (Read 1734 times)
0 Members and 1 Guest are viewing this topic.
James_Douglas
Newbie
*
Offline Offline

Posts: 11


« on: May 04, 2019, 06:27:33 pm »

Hi All,

I have my inner liner with the coolant lines all rebuilt and I will be putting it into the case in the next couple of days.

I tried to blow through the lines, from the small line, to make sure that it is clear and I cannot.  I tried sucking and I got a little bit.

I would think when once taken apart the line should flow, not a lot as it is very small, but it should flow both directions.

Can someone educate me on this?  It was working before we evacuated it and I took it apart. I would has to put the whole thing together and then find out something is wrong with the copper lines.

I was very careful.  No kinks that I can see. 

What is the purpose of the large flat-ish copper tube that the large pipe runs through on the top of one side?  It is some kind of valve or one way device?

Thanks, James.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!