SMC Discussion Areas
July 19, 2019, 10:18:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Stoner coin mech is it correct?  (Read 1179 times)
0 Members and 1 Guest are viewing this topic.
Faza
Newbie
*
Offline Offline

Posts: 27


« on: December 28, 2018, 12:31:36 AM »

Guys
Ive imported a stoner senior with gum vendor to Australia to restore, before i start to disassemble the machine i like to check how it all operates and whether everything is correct for the machine.
The machine has a changemaker and a coin mechanism installed.
i have filled the changegiver with nickels but it doesnt seem to work when a dime is inserted, the dime just passes straight through the coin mech.
When a nickel is inserted it seems to work correctly.
With the coin mech installed i cant see the connection between the dime rejection wire and the coin mechanism. the linkage seems to be above my coin mech when it is installed?
also my machine has two price bar assemblies but only the lower one is connected to my coin mech.
can anyone please give advice on whether the coin mechanism in the machine is correct for the machine.
i have attached a few photos.
cheers
John
Logged
Faza
Newbie
*
Offline Offline

Posts: 27


« Reply #1 on: December 28, 2018, 04:50:13 AM »

Picture of the machine
Logged
Jim
Administrator
Soda Jerks
*****
Offline Offline

Posts: 5648


#1 Soda Jerk!


WWW
« Reply #2 on: December 28, 2018, 07:12:12 AM »

Hello John,

The coin-mech pictured is not a change-giver and will work as you have stated. Your coin-mech is "Nickels Only" and has been modified by removing the upper two "fingers" for 10 & 15 cent pricing. Logistics would make it difficult, but I probably have the proper coin-mech...
Hopefully helpful
Logged

My six cents,

Jim

Ltransam
Soda Jerks
*****
Offline Offline

Posts: 2632


« Reply #3 on: December 28, 2018, 10:24:57 AM »



Jim’s the Expert on this
Logged

Glascock Counter Top
VMC 81 7Up
Vendo-110-81D-V-56 V-23
Jacobs Pepsi-56
Stoner Cookie &5 Pull Pastry& 180 Candy
Kelvinator FS-51(Canada)
Cavalier's C-55-E-C-55-D
Selmix Sprite
Selmix Pepsi on Draugh
Faza
Newbie
*
Offline Offline

Posts: 27


« Reply #4 on: December 28, 2018, 03:44:57 PM »

Thx Jim I suspected it was incorrect, I'll send you an email.
Cheers
John
Logged
Ltransam
Soda Jerks
*****
Offline Offline

Posts: 2632


« Reply #5 on: December 28, 2018, 07:00:45 PM »

Faza ,

  It true the mech is incorrect .And I’m 1000% sure Jim the man . My question to you is to you have a manual for your machine ? I’m thinking that you may also need to adj you pulls to work the way you want some on 10 cent some on nickel 5 cent our all on a Dime or all on nickel is also possible  . I can’t explain it  tounge tounge
« Last Edit: December 28, 2018, 07:03:12 PM by Ltransam » Logged

Glascock Counter Top
VMC 81 7Up
Vendo-110-81D-V-56 V-23
Jacobs Pepsi-56
Stoner Cookie &5 Pull Pastry& 180 Candy
Kelvinator FS-51(Canada)
Cavalier's C-55-E-C-55-D
Selmix Sprite
Selmix Pepsi on Draugh
Faza
Newbie
*
Offline Offline

Posts: 27


« Reply #6 on: December 28, 2018, 07:57:37 PM »

Yes I have the manual I downloaded from this great site, must admit the manual can be a bit confusing.
I think with the correct mech in the machine it will be a lot clearer.
Logged
Faza
Newbie
*
Offline Offline

Posts: 27


« Reply #7 on: January 25, 2019, 06:24:20 PM »

Wondering if anyone could take a picture of the correct coin changer mechanism for me.
Both sides of the mechanism if possible.
Thanks
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!