SMC Discussion Areas
March 29, 2024, 02:04:01 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Coinco S75-9800A coin changer  (Read 3168 times)
0 Members and 1 Guest are viewing this topic.
sjt1803
Newbie
*
Offline Offline

Posts: 17


« on: September 04, 2018, 04:53:31 pm »

Quick Question, for those out there familiar with these coin changers

Is it normal operation for one or more of the lockout solenoids to be active during standby operation.

Does it have any effect on normal operation if there are No change coins present?


I did find an interesting thing when it came to the coin switches, normal operation is for the switches to be on in standby.









Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5387


This is fine...everythings going to be OK....


WWW
« Reply #1 on: September 04, 2018, 08:42:17 pm »

Quick Question, for those out there familiar with these coin changers

Is it normal operation for one or more of the lockout solenoids to be active during standby operation.

Does it have any effect on normal operation if there are No change coins present?


I did find an interesting thing when it came to the coin switches, normal operation is for the switches to be on in standby.


Yes... no change means the mech will only accept exact change, example for a 10-cent purchase you'd have to insert 2-nickels or 1-dime, the mech will reject a quarter in this example.
also note that both CREMs as they are called are normally held in when all is right insofar as the mech is concerned IE; sufficient change in the tubes & the bottle stacks vend switch is in the "ready to vend " position. that means that it's ready to vend & not sold out or in a current vending cycle or stuck in the middle of a cycle ( such as a bottle hasn't been delivered or removed from the machined yet













« Last Edit: September 04, 2018, 08:52:28 pm by johnieG » Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
sjt1803
Newbie
*
Offline Offline

Posts: 17


« Reply #2 on: September 04, 2018, 11:01:48 pm »

Thanks for answering
It seemed right but I thought it strange to have coils powered continuous. (heat and current draw on the control bd)

So... If it's set for a dime, is there any situation when the coil(s) are not powered?

As far as a ready to vend switch, there isn't one. This coin changer is in  a VFA56
As far as I can see there is no way for the coin changer to determine the machine is ready to vend.

The only connection to the bottle stack is momentary power for the solenoid on it, when the machine is coined up.

Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!