Vendorlator/Vendo 56 Parts Machine

[Zach]

Found this gem last night, 100% complete and the mechanics all work and will test if it cools tonight. Has a 10 cent mechanical mech that works like a champ!

Sadly, the cabinet is rusted pretty good so I will be parting this machine out. I haven't decided what I want to do with the parts that fit a round corner 56 so at the moment that stuff is not for sale (well maybe for the right price  )  but everything else that is square machine specific is for sale including coin door, cabinet, bezels, medallion, etc. If anyone needs any of these parts off it let me know or if anyone has a round corner 56 cabinet and main door for sale let me know as well.  

[Slapshot42]

Good Find bought the same machine last year.  Once I took all the good parts off nobody was a interested when I put the left over parts on the site / eBay.

[Zach]

Sadly I am short on space, the good stuff will stay and the rest may go to the scrapper if no one wants it

[Slapshot42]

Sadly I am short on space, the good stuff will stay and the rest may go to the scrapper if no one wants it

I did the same thing.  I found a door, and cabinet and made a RT 56.

[Zach]

Did you have to modify the mech for the RT 56?

[Creighton]

Modify bottle rack or coin mech? B/R stack no if it is all manual. Coin mech know not suspect will be fine. Keep the door arms just in case. Good luck on the sale !.
Creighton

[Slapshot42]

Did you have to modify the mech for the RT 56?

Depends on mechanism.  Normal Vendo shafts with one pin hole will fit the V44, V56, V81 & LD V-110.  Some have expirence the shorter shaft in which the insulation behind the door liner around the mechanism needs be thinned down .

[Slapshot42]

There was one sitting on AZ Craigslist a few months ago for a few hundred.  You may check with Mygoose81 ( Ray ) I think he knew ther seller.

[Zach]

Thanks for the info, I will ask him!