Vendo 39 coin mech

[Hrdestiny]

I just recently acquired a Vendo 39 that has a 10 cent sticker on it.  If you insert a dime it will not take it.  I decided to try a nickel. It takes the nickel but will not vend.  If you insert a second nickel it will vend.  Ive had several different 39's but never a 10 cent machine that takes two nickels.  Is this normal or is there something wrong?  Any help is greatly appreciated.  Thanks

[ajf5577]

Are the dimes dropping through to the mechanism, or rejecting?
Clean your rejector really well, especially on the dime track.

[Hrdestiny]

I have cleaned and scrubbed on this thing like crazy and it will not accept a dime. Nickels are accepted every time. Could this be a nickel only mech? If so how can I tell if it is? Any help is greatly appreciated.

[Creighton]

Can't tell without some photo's . Lacking same yes most likely a 5 cent x2 to vend on a 10 cents. Not common but out there.
Creighton

[Hrdestiny]

Creighton thanks for the reply. Is there a secret to getting pics to post on here. Says file is to big when I try to post even one pic

[Slapshot42]

Creighton thanks for the reply. Is there a secret to getting pics to post on here. Says file is to big when I try to post even one pic

http://soda-machines.com/discussions/index.php/topic,16710.0.html

[MoonDawg]

    You could send it to the Coin Drop Shop in Arizona. 602 908-7202.

    Tom will either fix it or take it as a trade-in for one that works.

[Hrdestiny]

Here are pics of it. Hopefully someone can tell me exactly what I have. It was on a vendo 39 that has stickers that say iinsert dime to vend. Dimes will not work but 2 nickels will work.  Dimes go directly to rejector. Thanks for the help.

[Jonathan816]

I suggest setting the mech up for free vend and not worrying about this.

[MoonDawg]

      You have the proper rejector.  Set it on a level surface and drop in a dime.
Looking at it from your picture #2 you will see where the coin is getting stuck.
Remove screws and spring as necessary and clean that coin path.

(And in reply to your older post, I have a pretty clean VMC 110 cabinet that I don't need)