Exact change light H63

[flapjack1439]

I have an H63A. There seems to be a circular light around the coin slot that says "Exact change only". There is no change mech in the machine. Anyone know how to light it?

[Slapshot42]

If you plan to install a coin mechanism in the machine once the change tubes are filled it will go away. 

[flapjack1439]

It's presently off. I want to light it. Are you familiar?

[tkaz]

Do you have the machine working on free vend with a switch?  I'm thinking that a jumper from pin 1 to pin 7 on the jones socket might get it to work, but I'd need to test on my machine before I could recommend that.

[flapjack1439]

No free vend. I use quarters. I take it the Jones socket is the plug in the coin mech area.
 Please let me know.

[tkaz]

So there is a coin mechanism in the machine?  I am confused

[Slapshot42]

No free vend. I use quarters. I take it the Jones socket is the plug in the coin mech area.
 Please let me know.

Yes it's 8 pins.  How are you feeding quarters without a coin mechanism?

[Slapshot42]

I have an H63A. There seems to be a circular light around the coin slot that says "Exact change only". There is no change mech in the machine. Anyone know how to light it?

Fill the change tubes.  If there is no change in the tubes of the coin mechanism the "exact change " light will stay lit because the tubes are empty resulting in shorting you your change...

[johnieG]

If all you wish to do is light up the " use exact change only"  lamp, jumper the #2 & #5 sockets of the female "jones" plug,  assuming you will NOT be using a coinmech.

[flapjack1439]

Sorry for the confusion. There is a coin mech, it takes quarters only. It works fine. I do not have a free vend switch. There are no change tubes, it does not make change. Inside the mech area is a socket and harness with multiple connections (Jones Socket?) So I just jumper 2 and 5 and that will light the exact change light. Do you have a diagram or pic? Thanks