SMC Discussion Areas
March 29, 2024, 08:31:20 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: VMC 44 Crank Handle Reinstall  (Read 5596 times)
0 Members and 1 Guest are viewing this topic.
magpies35
Newbie
*
Offline Offline

Posts: 11


« on: January 13, 2016, 08:49:06 am »

I have a VMC 44 that I cranked the vend handle half a turn counterclockwise to open the front door.  I unpinned the handle to get it chrome plated and when I went to reinstall it, it has now dropped down to a three quarter turn counterclockwise and I cannot get it to turn clockwise to get it back to the original position to vend. It's jammed and will not turn in either direction.  Do I need to take off the coin mechanism or is there an easier way to un-jam it?

Any help would be greatly appreciated.

Thanks!

Matt
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224



« Reply #1 on: January 13, 2016, 10:41:33 am »

        If you did not take the parts out of the inside of the handle before plating, they are now frozen stuck with chrome.
Time for the big tools.
Logged

Glen
magpies35
Newbie
*
Offline Offline

Posts: 11


« Reply #2 on: January 13, 2016, 07:41:23 pm »

I guess I have some work to do.

Great information.

Thanks!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!