SMC Discussion Areas
November 10, 2024, 02:45:01 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vendo 90 Vend Solenoid  (Read 5298 times)
0 Members and 1 Guest are viewing this topic.
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« on: December 12, 2014, 12:18:29 pm »

I'm restoring a Vendo 90 for a customer and I think the Vendo Solenoid is bad? or not working?
not sure if it's the connection, the Coin mech? or what.

I have a new coin mech coming to try, but does anyone have an extra Solenoid? 

Thanks
John
Logged

Soda Machine Enthusiast since 1996!
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #1 on: December 12, 2014, 12:50:58 pm »

      I have a bunch of them. Try sending 110 volts to it for 1 second, that tells you if it is good. They often just need a drop of oil.
Logged

Glen
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #2 on: December 12, 2014, 05:56:51 pm »

Ok, I'll try that...
it moves freely but no signal to it? maybe it's the coin mech?

I ordered a new one from Funtronics,, so we'll see if that triggers it..

if not I may reach out to you!

Thanks
John
Logged

Soda Machine Enthusiast since 1996!
tkaz
Soda Jerks
*****
Offline Offline

Posts: 1900

tkaz


WWW
« Reply #3 on: December 12, 2014, 06:44:57 pm »

I have a quick tester for machines which is just an old Jones plug and wiring cut from a bad mech with a pushbutton switch on the other end, wired in the free-play switch way.  I take it with me when I buy a machine to do a quick check on the vending if the coin mech happens to not be working.  Nice little tool to have around the shop when working on a machine too, and pretty quick to put together.
Logged

jimq
Newbie
*
Offline Offline

Posts: 7


« Reply #4 on: February 19, 2015, 05:00:46 pm »

Tom,

Just read your response on this subject - You mention a wiring harness you use to check the vend cycle when the Coinco unit is inoperable. Could you post a wiring diagram of this harness?
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #5 on: February 19, 2015, 06:06:48 pm »

        Do a search on this site for "freeplay switch", it's been discussed here many times.
Logged

Glen
tkaz
Soda Jerks
*****
Offline Offline

Posts: 1900

tkaz


WWW
« Reply #6 on: February 20, 2015, 01:04:18 am »

http://soda-machines.com/discussions/index.php/topic,871.0.html

I just cut the jones plug cord from a dead coin mech and wire a momentary switch between the #1 & #3 wires, very simple
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!