Cavalier 8-64 Wiring Diagram?

[Rob_Feature]

So, I pulled my cooling system out to get it repaired (thanks JohnieG!) but now I realized I dont have any kind of wiring diagram or anything else to help me ensure the wiring goes back in the right places.  I hear its all 110v (ie. no transformer) so that should make it a little easier, but I dont want to mess anything up.

Can someone give me guidance on reconnecting all the wiring harnesses correctly so I dont blow stuff up?

[MoonDawg]

        If you pulled your compressor unit out, you only disconnected the 2 black power wires that plugged in to your junction box.
They are marked on the box as "Line". All other wires will be marked by color as well.

[Rob_Feature]

Well, I didn't realize how much I had to take out so I had actually pulled the wire junction box as well (and most of it's wires   That means my front door and my rear plugs (below the bottle rack) also got pulled. 

I see there's wire colors on the junction box but they don't really seem to match any of my wiring (plus some wires are still jumpered from one to another)

Are these all just 110 AC with a hot and return to each point?  So I can pretty much just look at the junction and make sure hot is going to all the hots and return is matched with the input return?  Or is it more complicated than that?

[MoonDawg]

      Clean those wires Rob......they are all color coded. 

[Rob_Feature]

      Clean those wires Rob......they are all color coded. 

Haha...alrighty, will do

[Rob_Feature]

OK, I may be dumb...not sure   Got 3 problems, here's a pic:


1.  My first problem is I can't figure out how to match the colors on the box with the actual 'port' they're associated to.  There's 8 inputs on each side of this box, and no matter how I look at it, I can't see 8 'colors' listed for each side or understand how they line up with the ports.

2.  I'm assuming the 2 master inputs are indicated as 'line' on this...but which inputs do these map to?  Not sure...see #1

3.  Finally, these colors don't relate to my wiring colors. For example, in this pic you can see that a pink wire in plugged in (maybe to the 'orange' slot) but there's no 'pink' at all on this.  Looks like this was rewired?

Any ideas?  (hopefully this shows why I was looking for a diagram)

[tkaz]

Let me dig around on my other computer, I have some good photos of the junction boxes and a copy of the wiring diagram.

Update, here's one, this is off a Cavalier USS, but there is no difference

As for the wiring diagram, the colors don't really align, but if you can follow where each wire goes to, you should be able to figure it out

[Rob_Feature]

Wow.  tkaz you're my hero, thanks so much!  This is now SUPER easy to solve....you rock!

[Rob_Feature]

Darn.  I THOUGHT I was going to be all set...but I just realized there's no line inputs shown in this photo.  Which ports would the line go into tkaz? 

I tried reading the diagram but I still dont see how that diagram relates to how it looks when everything is actually plugged in like in your pic.

[MoonDawg]

      On your picture of the junction box, the word 'Line' indicates where you will connect your black compressor wires, to the same terminals as the blue and purple wires.