Replacing evaporator fan motor in vmc 33

[cccc5151]

Does anyone have advice on how to replace the evaporator fan motor on my pepsi vendolator 33?  I am not sure how to get to the motor as it is surrounded by a tube.   It looks like I have to remove the drum.   Is this correct or is there another way to get to the motor. Thanks

[MoonDawg]

       Don't remove the drum, the compressor and evaporator were made to be removed easily for this kind of service.

[cccc5151]

Thanks, I know the compressor fan motor is easy to get to but the evaporator fan motor looks like I need to remove the drum and cross bar support. See picture.  Am I missing something?

[collecture]

First remove the line cover.
Then there should be just a few screws holding the evaporator to the tub
and finally a bolt or two holding the compressor assembly.
Whole thing slides out.

For just the evap motor, you could probably gain acces by just remove the line cover and evap screws.

[cccc5151]

Ahh! Yes, now I get it. Thanks! I am new to this. I greatly appreciate your help!!