kraftworkz
Newbie
 Offline
Posts: 46
|
 |
« on: February 27, 2014, 03:49:08 pm » |
|
Some things I need for a VMC-88 Machine. Not sure if what is cross referenced with other machines, but would appreciate for more info if available.
1. Working Refrigeration System
2. Refrigeration wiring kit if not included with above
3. Crown Box
4. Cash Box
5. Adjustable Full Empty Arm unit on inside of door
That will do it for now, bu not limited too. If you have other parts not mentioned for the VMC-88 Pepsi let me know what you have.
As for a complete compressor deck. The one I have is frozen, so any ideas would be greatly appreciated. I'm a purist, so something original would be preferred. See photo of configuraton.
|
|
|
|
|
Logged
|
|
|
|
|
Sarman47
|
|
« Reply #1 on: February 27, 2014, 06:55:44 pm » |
|
Hi Kraftworkz Try touching base with Eric at Global Compressors, might have what you need or provide some advice on what route to follow. http://globalcompressors.comI like the look of the VMC 88, nice to see a little blue in a mostly sea of red ........... Jeff |
|
|
|
|
Logged
|
Cavalier C1-55D
Cavalier C2-55E
Westinghouse WB126-B6-D (daily driver)
Vendo 39
|
|
|
kraftworkz
Newbie
Offline
Posts: 46
|
|
« Reply #2 on: February 27, 2014, 07:30:24 pm » |
|
Hi Kraftworkz Try touching base with Eric at Global Compressors, might have what you need or provide some advice on what route to follow. http://globalcompressors.comI like the look of the VMC 88, nice to see a little blue in a mostly sea of red ........... Jeff Thanks, I did talk to Eric in the past and he could only offer me a new replacement unit, not an original. I do not want something new non American.. |
|
|
|
|
Logged
|
|
|
|
|
globalcompressors
|
|
« Reply #3 on: March 02, 2014, 11:09:47 am » |
|
Thanks, I did talk to Eric in the past and he could only offer me a new replacement unit, not an original. I do not want something new non American..
we'll, then we didn't "talk" enough. everything I build is 100% American made or American Companies. you have no idea how hard it is, to keep coming up with parts, without going Chinese... and to hear a comment like that, it's rather insulting. good luck to you. |
|
|
|
|
Logged
|
how's that OBAMA CARE workin' out for ya?
|
|
|
|
johnieG
|
|
« Reply #4 on: March 02, 2014, 12:42:43 pm » |
|
Hi & welcome to the site! so take the following with a grain of salt... Are you just trying to get it up & running, or were you planing to restore the machine? Just Venting here, so.....Why the heck would you want to stick a 60+ year old used deck into a machine? Originality wont matter squat if it doesn't work. Just sayin' if there's a concern about originality then why replace the wiring harness? Oh, wait because it doesn't work? then apply the same to the compressor. You don't put a junk yard motor into a restored auto, even if it's not to be restored, you're asking for component failure. Restore or rebuild the deck & replace the compressor. (bet you can't tell it's a pet peeve of mine)  But really, welcome to the site.  |
|
|
|
« Last Edit: March 02, 2014, 03:47:47 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
johnieG
|
|
« Reply #5 on: March 03, 2014, 11:31:03 pm » |
|
a one-post wonder....derp  |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
kraftworkz
Newbie
Offline
Posts: 46
|
|
« Reply #6 on: March 04, 2014, 01:54:13 am » |
|
we'll, then we didn't "talk" enough. everything I build is 100% American made or American Companies. you have no idea how hard
it is, to keep coming up with parts, without going Chinese... and to hear a comment like that, it's rather insulting.
good luck to you.
No insult was directed, sorry. I only asked you a question by phone, as to why it was making a clicking noise, and how to solve it. You offered me an entire new replacement, which is not an option for me. However I do believe my tech got it working, I'll have to check back with him. He installed a new capacitor and start relay I think, and to his words beat on it with a hammer, and it started to work. Sorry for the miscommunication. Thank you, the luck will be needed with my client, and their machine. |
|
|
|
|
Logged
|
|
|
|
|
johnieG
|
|
« Reply #7 on: March 04, 2014, 12:32:13 pm » |
|
However I do believe my tech got it working, I'll have to check back with him. He installed a new capacitor and start relay I think, and to his words beat on it with a hammer, and it started to work.Ah! Ye-olde Fred Flintstone technique! Happy we didn't scare you off! |
|
|
|
« Last Edit: March 04, 2014, 12:46:32 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
globalcompressors
|
|
« Reply #8 on: March 04, 2014, 05:26:58 pm » |
|
However I do believe my tech got it working, I'll have to check back with him. He installed a new capacitor and start relay I think, and to his words beat on it with a hammer, and it started to work.Ah! Ye-olde Fred Flintstone technique! Happy we didn't scare you off! HAHAHAHAHHAHA!!!!! |
|
|
|
|
Logged
|
how's that OBAMA CARE workin' out for ya?
|
|
|
|
johnieG
|
|
« Reply #9 on: March 04, 2014, 08:18:09 pm » |
|
Wait for it.....
|
|
|
|
« Last Edit: March 04, 2014, 08:27:01 pm by johnieG »
|
Logged
|
Spoon-feeding Newbies since 2001... Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
