Pepsi Vendorlator 56-Now set up FREE, but I want PAID

[collecture]

There are (5) screws on the left side of the stack unscrew those (5) screw and the whole stack comes out.  Take the shelves out first.  There are (2) guide posts on the back of the liner when installing the new stack make sure to skied the replacement stack back on those brackets / post.

One other suggestion:
Remove the (5) screws from bottom to top and securely hold the stack when you remove the final screw.

[MoonDawg]

        In addition to all of the bottle gates, someone has taken the liberty to remove your solenoid and all assosiated linkage at the bottom of the stack.  Dumb.........they only needed a piece of wire to freeplay the whole unit.

        I have several spare 56 bottle stacks here in So Calif,  if shipping doesn't break the bank.

[NewGuy]

Just found where previous owner cut the wires that go to solenoid. After looking at pictures of other machines hooked up, it looks like there are 4 wires going to stack mechanism. I added a picture I received that shows a machine hooked up

Here is picture of my cut wires, but theres only 2? Where do other 2 wires come from?