How to put sign frame back together?

[Netminder8]

OK, I know I must be making this harder than it is but I can't seem to remember how this sign frame goes back together and mounts on a Cavalier 64 USS-8-64K-DP 1972 model. Any know how this works?

[boss]

Do you have the rubber gasket that goes with the frame?

[Netminder8]

I have the sign and the gasket

[tkaz]

Take a look at this Ebay listing, the 5th photo shows the back of the sign, should give you a better idea how to put it back together.  

http://www.ebay.com/itm/COCA-COLA-DRINK-MACH-BY-CAVALIER-CSS-12-96-SIGN-WITH-FRAME-/270913017237?pt=LH_DefaultDomain_0&hash=item3f13ac9595&nma=true&si=qZT3iv%252FKzg7Vs13pLeh4vl7CjCk%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

Looks like you're learning one of the many lessons about tear-down...take a ton of photos so you can reference later!

[Netminder8]

That did help. Thanks! Your right, I need to take MORE pictures. I took a lot but obviously I need to take pictures of even the smallest things. I appreciate the time and help!

[tkaz]

That one is different than most of the USS signs I have seen, does your sign stick out of the machine an inch or two?  I have seen a few like that, and it seems like the brackets are right for that

[Fire708]

Have you been able to find a manual for that machine?
As I reassemble my v56 I keep the manual and the Picts I took open on my work bench. Using the parts diagrams and my Picts I've been able to figure out how a lot of stuff goes back together.

[boss]

Here's a pic of mine put together.  I also emailed this to you Darrell.