SMC Discussion Areas
November 23, 2024, 12:14:23 am
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Home
Help
Login
Register
SMC Discussion Areas
>
Restorations
>
Refinishing
(Moderators:
johnieG
,
Jim
) >
Question about my glass door liner
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Question about my glass door liner (Read 3953 times)
0 Members and 1 Guest are viewing this topic.
Netminder8
Newbie
Offline
Posts: 22
Question about my glass door liner
«
on:
December 07, 2013, 03:14:23 pm »
I am restoring my first vending machine and cant figure out why the glass door liner will not allow the door to shut all the way. It appears to be in correctly. Is there a way to adjust the spacing or does anyone have any suggestions? The model number is USS-8-64K DP April 1972 model. I believe this is a Cavalier 64 unless I was given the wrong information.
«
Last Edit: December 07, 2013, 03:52:30 pm by Netminder8
»
Logged
MoonDawg
Soda Jerks
Offline
Posts: 6227
Re: Question about my glass door liner
«
Reply #1 on:
December 07, 2013, 03:49:24 pm »
The height of the heads of the screws needs to be minimal. If you used roundhead screws, they will keep the hinge from closing fully.
You have a Cavalier 64, not to be confused with Vendo's model 63.
Logged
Glen
Netminder8
Newbie
Offline
Posts: 22
Re: Question about my glass door liner
«
Reply #2 on:
December 07, 2013, 03:50:33 pm »
These are the screws I used on the door frame. The flat ones are connected to the large door and the round ones are connected to the glass door frame. It will close if I push it but it wont close if I just let the springs do it.
Logged
Netminder8
Newbie
Offline
Posts: 22
Re: Question about my glass door liner
«
Reply #3 on:
December 07, 2013, 08:21:33 pm »
Do these look like the correct screws for each part of the mount?
Logged
MoonDawg
Soda Jerks
Offline
Posts: 6227
Re: Question about my glass door liner
«
Reply #4 on:
December 07, 2013, 08:51:01 pm »
Did you re-wind the springs?
Logged
Glen
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
The Coin Return
-----------------------------
=> Soda-Machines.Com News
=> Other Coin-Op's
=> General Chit Chat
=> Estimated Values
=> Tutorials & Tips
-----------------------------
Soda Machines, Coolers & Dispensers
-----------------------------
=> Pre 60's Machines & Coolers
=> Post 60's Machines & Coolers
=> Picnic Coolers
=> Syrup Dispensers
-----------------------------
Trouble-Shooting
-----------------------------
=> Coin Mechanisms
=> Refrigeration
=> Vending Mechanisms
-----------------------------
Restorations
-----------------------------
=> General
=> Refinishing
-----------------------------
The Vending Rack
-----------------------------
=> Swap Meet Area
Loading...
