SMC Discussion Areas
November 26, 2024, 09:51:00 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Where are light switches Vendo 90  (Read 4583 times)
0 Members and 1 Guest are viewing this topic.
Sodak Bob
25 Cent Member
****
Offline Offline

Posts: 327



« on: August 25, 2013, 11:36:14 am »

Where are the light switches for the Vendo 90 or do they come on with the machine.  I assume there are lights in the door and the main front sign ?  Also - how do I access the plastic cover over the assembly cam for changing the price...  Thanks
Logged

Bob
Rebel
25 Cent Member
****
Offline Offline

Posts: 268



« Reply #1 on: August 25, 2013, 01:20:18 pm »

No switches that I'm aware of. When you plug in, lights come on. Restoring a 63 now that had a few lights burned out,,one in door right over selection panel, one behind coin drop panel to light up bezel around coin slot and one behind marquee but no switches. If your coin mech is Coinco I'm not sure I can explain how to remove top section or not. There should be something in coin mech. section explaining.
Logged
Sodak Bob
25 Cent Member
****
Offline Offline

Posts: 327



« Reply #2 on: August 25, 2013, 09:00:21 pm »

thanks - i've got to the lights but will have to look up the price selection.
Logged

Bob
Rebel
25 Cent Member
****
Offline Offline

Posts: 268



« Reply #3 on: August 25, 2013, 09:09:15 pm »

If it's a Coinco,,,,,there is a group of pins,,all up is off for each selection. 1st pin pulled down is 5 cents, next is 20 then 40 and 60. So lets say you pull the first and second down,,you have set the price at 30 cents.
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #4 on: August 25, 2013, 09:19:02 pm »

If it's a Coinco, there is a group of switches, all up is off for each selection. 1st switch pulled down is 5 cents, next is 20 then 40 and 60. So lets say you pull the first and second down,,you have set the price at 30 cents.

Unless it's the earlier electro-mechanical version of a tan plastic Coinco, in which case there is a "humped" plastic cover over a ratcheting-type stepper relay with a price wheel, in which case you normally have to push sideways on the little price thumb wheel in able to allow it to turn to the desired price.  
« Last Edit: August 25, 2013, 09:20:36 pm by johnieG » Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #5 on: August 26, 2013, 06:49:46 am »

If it's a Coinco,,,,,there is a group of pins,,all up is off for each selection. 1st pin pulled down is 5 cents, next is 20 then 40 and 60. So lets say you pull the first and second down,,you have set the price at 30 cents.

      Correction: Switches are pushed down for off................and pin values double left to right...... 5, 10, 20, 40 and 80.  blush
Logged

Glen
Rebel
25 Cent Member
****
Offline Offline

Posts: 268



« Reply #6 on: August 26, 2013, 08:49:28 am »

      Correction: Switches are pushed down for off................and pin values double left to right...... 5, 10, 20, 40 and 80.  blush

Correct Moondawg,,,sorry for the confusion on my part,,well not confusion,,,,just wrong.
Logged
Sodak Bob
25 Cent Member
****
Offline Offline

Posts: 327



« Reply #7 on: August 26, 2013, 06:52:38 pm »

Johnie is right - it is the earlier version with the plastic "humped" cover.  That is the cover that I am about to break trying to get it off.  Any ideas
Logged

Bob
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!