The replacement coil is much too wide for the side sheetmetal, plus I would have to cut off the standoffs and the grates at the bottom. Not afraid to mod it, just don't want to mod it.
Don't want to cut the thing up and start poking holes in my tub without talking to them. Wish in hind site that I would have sent the old coil. That would have been plug and play.
yes Sir, and we spoke about the new unit NOT being an identicle replacement, along with the dividers maybe needing to be modified or removed. I clearly stated "self tapping screws would be needed for mounting. No, you don't have to screw hole into the bottom of the tub, if you don't want to. The bolt holes on the base, are off (1) pattern that I have, but won't fit 100% of the machines made. Some new bolt holes might be needed. The copper tubing looks to be bent all out of whack, NOT lining up with your machine now... you need to be very careful, lining things up and straightening the copper lines up. The designs I have come up with, are TIME TESTED and the same designs I've been using for the last 15 years. I hope you left a message, at the shop, with a phone number.... I'll call you tomorrow. If you're my Customer in Tomball (can't tell from your user name here) I'd be more than happy to install the unit for you, free of charge.... bring the box.
It should look something like this... when you're finished.
