SMC Discussion Areas
November 23, 2024, 11:14:08 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Help!!! Vendo vendo 56. Water ??  (Read 4902 times)
0 Members and 1 Guest are viewing this topic.
williebman
Newbie
*
Offline Offline

Posts: 19



« on: May 23, 2013, 08:56:45 pm »

I have a vendo 56 coke machine and its always plugged in my garage I opened it up to fill it up with coke bottles and noticed a puddle of water under the compressor.How much condensation should I expect ? And is that normal to have water under the compressor.
Logged
mainecoke1
Newbie
*
Offline Offline

Posts: 3



« Reply #1 on: May 23, 2013, 09:38:35 pm »

That's completely normal. If it becomes an issue for you location the drain tube in the compressor compartment and put a drip tray under it. Since its in your garage I would just let it go.
Logged

Vendo 81b
Vendo 81d
Vendo 56
williebman
Newbie
*
Offline Offline

Posts: 19



« Reply #2 on: May 23, 2013, 09:47:14 pm »

Awesome thank you very much for your expertise
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #3 on: May 23, 2013, 10:18:15 pm »

All machines should have a condensation collector, whether it is a jar or pan. You are missing something, but yes it is normal for the machine to discharge water. Amount seems to fluctuate with the humidity.
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #4 on: May 24, 2013, 07:51:47 am »

You'll find condensation water going all over the compressor area if your drain tubing is missing or cracked, and your drain pan or jar is missing.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
williebman
Newbie
*
Offline Offline

Posts: 19



« Reply #5 on: May 24, 2013, 01:16:31 pm »

I just looked at my compressor compartment and saw that there was a drain tube but think its plugged cuz I followed it and it drains under the machine. How do I unplug it or what's the best way about going about this ? Thanks
Logged
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #6 on: May 24, 2013, 02:12:30 pm »

Stick something in it and clear out the crud, us a stiff wire or maybe just some compressed air will do it as well.

Good Luck
Logged

Soda Machine Enthusiast since 1996!
Tomahawk27
5 Cent Member
**
Offline Offline

Posts: 78


« Reply #7 on: May 24, 2013, 03:04:05 pm »

Had the same issue myself. My drip tube starts in the upper cabinet under the evaporator (Westy 102) and I just bought some clear tubing, connected it, and ran it to the bottom of my machine to a pan underneath.

The clip that connects the two tubes was just allowing debris to build up. Took off the pin, ran a bent clothes hanger through it, and followed that with some compressed air.
Logged
cokecolaman
Soda Jerks
*****
Offline Offline

Posts: 986



« Reply #8 on: May 24, 2013, 04:19:16 pm »

You can buy a cheap spring- drain unplugger at harbor freight for $4... It's about 2 ft long. And works great.
Logged

VMC Coke 88 (nice original)
VMC Pepsi 81
VMC Orange Crush 81
VMC Squirt 81
VMC Dr. Pepper 81
VMC RC 81
VMC 7up 81 st
Vendo 44 original
Jacobs 56 Pepsi
Cavalier 33
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!