I know this comes down to personal preference, but I wanted to get people's opinion on some ideas I have for decals on my Atlas slider. In a previous thread (
http://tinyurl.com/bj54r27), I described what was originally on the unit. It was the oval logo with "drink Dr. Pepper" as the text (roughly 25.5"W x 8.5"L). The logo I have pictured below (mine was a decal, not a sign) is similar to what was on the unit except the the decal on my unit had the colors inverted (red text, white oval, red fill, white border). The same decal was on the side door (13.5"W x 4.5"L).
So, I could go original decals for the unit or with a few other ideas. The second is some ideas I got from Eric on the boards. It's the same "drink Dr. Pepper" logo that was on the unit, except with the more common colors (like pictured above). On the side would be a bottle cap/DP clock decal similar to what collecture used is his DP-theme Select-o-Matic (
http://tinyurl.com/appsom5).
Next, is a little more permanent idea. As mentioned, the original logo on the front was 25.5"W x 8.5"L. I have an original porcelain DP sign (pictured below) that is very similar dimensions (24"W x 9.25"L). I thought I could put this on the front but that would obviously involve drilling and riveting so there's no turning back. Similarly, I thought I could get a porcelain clock for the side door and rivet that in (picture from google pasted below).
Lastly, I could do a different set of decals or a combination of the above ideas.
What are the your thoughts? Any ideas are welcome. This is only my second restoration and most of you have done many more. The last picture I attached is just the bare shell which I got back from paint last week. I can't wait to get it finished, though, as another member mentioned the cap catcher may look better black even though it was originally green. I'm going back and forth on that.
