|
kbareit
|
 |
« on: December 30, 2012, 08:33:46 pm » |
|
I found a better replacement vend motor for the Westies. It bolts in without modifying the mounting bracket. It still requires a new cam assembly as the shaft is 5/16" and does not have a pin through it. If anyone needs one P/M me and I'll make arrangements to get the motor and cam out.
Thanks,Ken
|
|
|
|
|
Logged
|
Cavalier 27
Jacobs 26
Ideal 55 Hires root beer, 7-Up restored
Ideal 55 Pepsi, Barqs original
Double cola,Squirt,Nesbitts,Canada Dry on deck
3 Westy 60's
3 Westy 78's
Cav 72 original
S&S 1400 WD2 Pepsi
Stoner Junior
|
|
|
|
tkaz
|
|
« Reply #1 on: December 30, 2012, 08:59:21 pm » |
|
Nice work! How hard it is making up the new cams?
|
|
|
|
|
Logged
|
|
|
|
|
kbareit
|
|
« Reply #2 on: December 30, 2012, 09:37:44 pm » |
|
Takes about 2 to three hours to cut out, grind down,drill and tap the collar and weld it together. I'm hoping to have a plasma cutter soon so the cut and grind time will be about half.
|
|
|
|
|
Logged
|
Cavalier 27
Jacobs 26
Ideal 55 Hires root beer, 7-Up restored
Ideal 55 Pepsi, Barqs original
Double cola,Squirt,Nesbitts,Canada Dry on deck
3 Westy 60's
3 Westy 78's
Cav 72 original
S&S 1400 WD2 Pepsi
Stoner Junior
|
|
|
krovel
5 Cent Member
 Offline
Posts: 98
|
|
« Reply #3 on: December 30, 2012, 10:19:32 pm » |
|
Is that just out of another machine? Or can you order that one too
|
|
|
|
|
Logged
|
Westinghouse WB-60 (single select)
Westinghouse WB102
|
|
|
|
tkaz
|
|
« Reply #4 on: December 30, 2012, 10:33:40 pm » |
|
What's the big difference in the cam, is it just the shaft diameter? Could you just weld in an insert to an original and drill it out?
|
|
|
|
|
Logged
|
|
|
|
|
kbareit
|
|
« Reply #5 on: December 30, 2012, 10:36:13 pm » |
|
Is that just out of another machine? Or can you order that one too
New motor, takes about a day to get it in. |
|
|
|
|
Logged
|
Cavalier 27
Jacobs 26
Ideal 55 Hires root beer, 7-Up restored
Ideal 55 Pepsi, Barqs original
Double cola,Squirt,Nesbitts,Canada Dry on deck
3 Westy 60's
3 Westy 78's
Cav 72 original
S&S 1400 WD2 Pepsi
Stoner Junior
|
|
|
|
kbareit
|
|
« Reply #6 on: December 30, 2012, 10:39:38 pm » |
|
What's the big difference in the cam, is it just the shaft diameter? Could you just weld in an insert to an original and drill it out?
On the original cam you can weld an insert in and drill it out but you don't have much to work with on the collar to drill and tap for set screws. |
|
|
|
|
Logged
|
Cavalier 27
Jacobs 26
Ideal 55 Hires root beer, 7-Up restored
Ideal 55 Pepsi, Barqs original
Double cola,Squirt,Nesbitts,Canada Dry on deck
3 Westy 60's
3 Westy 78's
Cav 72 original
S&S 1400 WD2 Pepsi
Stoner Junior
|
|
|
|
johnieG
|
|
« Reply #7 on: December 30, 2012, 11:42:07 pm » |
|
Well this is good news for all of those folks with Westinghouse Select-a-Matics! way to go!  So, is the replacement motors RPM (rotating speed) the same? or at least close? Also, they do sell motor shaft adapters at suppliers like Grangers & such. It would make adapting the new unit to the old cam much easier. |
|
|
|
|
Logged
|
Spoon-feeding Newbies since 2001...  Yeah..220,221 whatever it takes. Remember, all it needs is a shot of Freon! The Vendo V-83 is the '59 Edsel of the coke machine world. ;p Spray painting does NOT restore a compressor 11 is louder than 10... "Hope" is good, but it's not an action plan. |
|
|
|
kbareit
|
|
« Reply #8 on: December 31, 2012, 12:58:28 pm » |
|
It's a 20 rpm motor. I searched Grainger and McMaster Carr for an adaptor to use the original cam but the biggest hang up is fastening it to the shaft. If anyone has an idea on it I'm all for it. The reason I remade the cam is to make it easier to install the motor without having to fabricate or adapt anything to make it work other than adjusting the travel and the cycling switch.
|
|
|
|
|
Logged
|
Cavalier 27
Jacobs 26
Ideal 55 Hires root beer, 7-Up restored
Ideal 55 Pepsi, Barqs original
Double cola,Squirt,Nesbitts,Canada Dry on deck
3 Westy 60's
3 Westy 78's
Cav 72 original
S&S 1400 WD2 Pepsi
Stoner Junior
|
|
|
|
