Any place I can get a spring replicated/reproduced?

[brasskey]

I'm almost done taking my Atlas slider apart and most everything seems to be in decent shape.  The one exception is a spring that is used for the bottle unloading mechanism.  This spring pulls the bottle bucket back into place after a vend.  It is rusted pretty bad on the circular bends and there is a crack on one of the bends.  It's just a matter of time before it breaks.  Since many of you have fixed numerous machines I was hoping someone might have a suggestion for a company that could replicate this spring.  Am I out of luck?  Any other options?  Thanks.

[collecture]

I have yet to try, but it is on my list. Doesn't look too hard!
Only way to go if you only need one - at least $100 otherwise!

http://home.earthlink.net/~bazillion/intro.html

McMaster-Carr sells music wire in small lots. Good Luck!

[briandr1]

Theres a place in houston called Draco spring manufacturing, they may make springs that small I dont know if just one though. When I worked in the drilling fluid parts manufacturing we used to get our snap rings from them.

[johnieG]

Hmmm...looks like the spring inside one of those plastic clamps I use for wood working...flip one over & see if you can make use of it.

[brasskey]

Thanks for the suggestions everyone. I'll see what works best.