SMC Discussion Areas
November 26, 2024, 09:59:19 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: How to replace a condensor fan  (Read 13392 times)
0 Members and 1 Guest are viewing this topic.
vibby3
Guest
« on: June 13, 2012, 02:41:47 pm »

I have a circa 1970 Lacrosse Pepsi machine with a loud noise coming from the area of the compresser and fan at the bottom of the machine.  The noise does not quiet down at all when I apply pressure to the compressor, so I believe the noise to be coming from the fan and have purchased a new one from fun-tronics.  The fan is located behind the condenser fins and looks a bit hard to replace. Will I be able to slide the old fan out and new one in between the fins and the compressor, or do I need to remove the whole deck that holds the compresser, fan and fins?  Is that hard to do?  Will I mess with the refridgeration connections up to the top portion of the machine if I do this?  This is my first machine so this is all new to me.  Thanks for your help.
Logged
tkaz
Soda Jerks
*****
Offline Offline

Posts: 1900

tkaz


WWW
« Reply #1 on: June 13, 2012, 02:48:00 pm »

A quick way to check if the fan is at fault is to UNPLUG the machine, jam a rag or small towel under the condenser fan so it can't spin, then plug the machine back in for a few seconds to see if the noise is still there.  Don't let it run for too long or you'll burn the motor out.
Logged

MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #2 on: June 13, 2012, 03:36:38 pm »

     Yes, first make sure it is your fan motor making the noise.
     If it is loud, don't try and change it in place, the compressor deck and evapotator units were made to be easily removed for this reason.
Logged

Glen
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #3 on: June 13, 2012, 04:44:58 pm »

Use the force Luke ( what they said)  smile
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
globalcompressors
Soda Jerks
*****
Offline Offline

Posts: 839


Global Compressors (Eric)


WWW
« Reply #4 on: June 13, 2012, 05:11:00 pm »

you won't hurt anything...

break loose the lower unit and pull it out far enough, giving you some "elbow" room.
you'll get it from there, and it's fairly easy...
« Last Edit: June 13, 2012, 05:14:44 pm by globalcompressors » Logged

how's that OBAMA CARE workin' out for ya?
vibby3
Guest
« Reply #5 on: June 15, 2012, 09:18:35 am »

Well, I took your excellent advice and put a rag in place to stop the fan from spinning in order to check the noise.  The same noise remained when the fan was stopped from spinning, which means the noise is coming from the compressor.  The noise is not overly obnoxious, but is loud enough that it prevents me from having in the basement rather than the garage. The unit cools just fine.  Is this the nature of the beast when dealing with a 40 year old machine?  Any suggestions?  Thanks.
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #6 on: June 15, 2012, 09:47:42 am »

      I've never owned a Lacrosse, but several Cavalier machines have been just plain loud.
Logged

Glen
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #7 on: June 15, 2012, 05:17:03 pm »

Could be just a copper line rattling around & banging into something, or a loose/rattling compressor mounting plate.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
vibby3
Guest
« Reply #8 on: June 18, 2012, 08:39:55 am »

No obvious rattle or fix for the compressor noise, so I guess that's the way it goes.  Can't imagine it is worth the expense to replace compressor.  One other question I have is which way is the fan supposed to spin?  The fan currently blows the air away from the compressor toward the fins.  Is this correct?
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #9 on: June 18, 2012, 09:06:15 am »

No obvious rattle or fix for the compressor noise, so I guess that's the way it goes.  Can't imagine it is worth the expense to replace compressor.  One other question I have is which way is the fan supposed to spin?  The fan currently blows the air away from the compressor toward the fins.  Is this correct?

It should draw air through the fins and over the compressor.
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!