SMC Discussion Areas
November 27, 2024, 06:19:24 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: WBT Pepsi Machine  (Read 10555 times)
0 Members and 1 Guest are viewing this topic.
berrmich
Newbie
*
Offline Offline

Posts: 7


« on: February 14, 2012, 09:48:53 am »

Ok.  So that's a bit vague.  This will be my first machine.  I would like to restore it and put it in the game room of the new house I just bought.  I can do a little body work but probably wouldn't want to get much into welding new metal in.  So I'm looking for something that is in decent condition and near complete or complete.

I don't really want to spend 1500 and then mess up the restoration.  So I would like to start with something in the 3-5 hundred range.  After reading post here it seems like the 110 may fit the bill.  The 144sa looks cool too but I feel like I should see one in person to really get an idea of the size.  Smiley  Found someone about 3 hours away that had an unrestored for 2k!  Seems pricey from what I've seen.

My requirements:
1.  round top
2.  Can vend 12oz glass bottles
3.  Pepsi - cause I like the 12oz Mountain Dew in glass and it seems wrong to put these in a coke machine.  Smiley
4.  Multiselection

Since I'm not going to try to sell it, I don't mind a bigger machine.  It will not be too bad getting it to the game room.. big doors, ect.. (not in basement)

I live in SW michigan.  I can easily get to Detroit, Chicago, upper Michigan, and Indianapolis.

Also if anyone close (50 miles or so) has a 110, 144sa, or other machine you think may fit the bill... I would love to see yours so I can get an idea on size, ect.

Someone must have an unrestored 110 in their garage that they are sick of looking at!

-Mike
Logged
Kilroy
Soda Jerks
*****
Offline Offline

Posts: 4278



WWW
« Reply #1 on: February 14, 2012, 10:30:21 am »

Welcome Mike,
A slider is also an option I'd look at. You can get an Embossed  Pepsi one for 250 - $230, and may be easier to find  than a Pepsi 110.  It seems round top Pepsi machines are near impossible in Michigan

I'll keep my eyes open for you here in the SE end of Michigan, and don't be alarmed if you get  an invite to join the Michigan Mafia.
« Last Edit: February 14, 2012, 11:11:38 am by Kilroy » Logged

"Restored they go for $6-7,000!!"
Member : Michigan Mafia
bcharlton
Soda Jerks
*****
Offline Offline

Posts: 1285



« Reply #2 on: February 14, 2012, 11:01:44 am »

The Slider may be you least expesive machine from the 1950s.  I agree.
Logged

bcexpress

Vendo 39 Original
Cavalier C-51 Restored
Cavalier C-96 Restored (almost done)
GE Double Chiller Restored
Cavalier C-33 7 Up Restored
Vendo 27b Pepsi
Vendo 81b
Westinghouse wd-5 / WE-6
3 Stoner Candy/Theatre/Junior/180
Bastian Blessing Bobtail soda fountain
Jacobs 56 Pepsi
mznb1u
Soda Jerks
*****
Offline Offline

Posts: 3350


Those Who Stay Will be Champions!


« Reply #3 on: February 14, 2012, 11:06:51 am »

Mike,

Welcome aboard!  I don't have any Pepsi machines as my wife's family was involved in bottling Coca Cola for 4 generations and that would cut me out of the inheritance!  biggrin

I do, however, have a nice Coca Cola VMC 144SA (3 selection) that is complete and was running when I bought it.  glare I hate to use that tired line but it was running when I bought it 3 or so years ago and it has just been sitting in my garage on a dolly awaiting my time and attention.  I have since decided that I really don't have any plans for it other than perhaps using the main door for a bathroom door when I finish my basement; but I would hate to chop up a complete machine.

I would be willing to let this one go for what I have into it--$350.  It is a nice looking machine but I know it needs some work.  It should probably be re-wired and have new fans installed in it.  And I know there is some rust on the bottom of the interior tub of the machine that should be addressed.  I have attached a picture, let me know if you are interested and I can sent you more.

 drinking Tim drinking
Logged
berrmich
Newbie
*
Offline Offline

Posts: 7


« Reply #4 on: February 14, 2012, 11:33:16 am »

Thanks for the reponses!  I would rather a machine than a slider.  I might be tempted to look at a coke machine..   Smiley  where are you located?

-Mike
Logged
mznb1u
Soda Jerks
*****
Offline Offline

Posts: 3350


Those Who Stay Will be Champions!


« Reply #5 on: February 14, 2012, 12:48:52 pm »

I am near Brighton, MI so not that far away.  Based on your screen name, I am assuming that you are in Berrien County.  I travel all around the state for work so I am pretty familiar with most counties.

 drinking Tim drinking
Logged
mllaugh3
5 Cent Member
**
Offline Offline

Posts: 74



« Reply #6 on: February 14, 2012, 12:54:35 pm »

It is not a round top but I have a LaCrosse 7 up machine.  It's big and I think has 9 selections.  I am in Midalnd MI is interested.  I can send pics.  Let me know.
Logged

Mike

Vendo 81D
VMC 139
Few square tops
LaCrosse 7-up
berrmich
Newbie
*
Offline Offline

Posts: 7


« Reply #7 on: February 14, 2012, 01:44:02 pm »

Midland isn't too bad.  About 3.5 hours for me.  I am in berrien county, but my name is actually the first four letters of the last name and the first four of by first name.  Do you happen to have more pics?  Smiley  Is the lacross a flat top?  Definately would like a round top.  I don't like the flat ones at all.
Logged
mllaugh3
5 Cent Member
**
Offline Offline

Posts: 74



« Reply #8 on: February 14, 2012, 02:12:27 pm »

Yes it is a flat top but pretty cool looking machine.  Here is a pic.
Logged

Mike

Vendo 81D
VMC 139
Few square tops
LaCrosse 7-up
berrmich
Newbie
*
Offline Offline

Posts: 7


« Reply #9 on: February 14, 2012, 02:23:33 pm »

Brighton is actually near my sister.  She lives in Bellville.  I think I am interested in looking at it.  Possibly I could stop by when I go to visit her.  Do you have more pics?

-Mike
Logged
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!