Estimate for sandblasting a machine (CSS-96) and painting?

[brasskey]

I know price can vary depending on what's being done, but I wanted to get some ideas on what I would be looking to spend on some services since I'm new at restoring a machine from the ground up. I don't know what to expect so I thought I'd ask.

I completely disassembled my CSS-96 and I was going to start looking into places to get estimates on sandblasting.  What is a price range I should be expecting? Obviously the big pieces are the shell and the door.  Along with the coin mech door there are maybe 10 other pieces.

Next, what about a paint job?  I know there will be a little body work that will need to be done so that will increase the price.  Disregarding major body work, what should I expect on that?  Thanks.

[mznb1u]

You will want to inquire about soda blasting unless there is a lot of rust on the machine.  Blasting with more abrasive media can cause the metal of the cabinet to heat up and warp.  Not sure what would be a good price though!

  Tim

[msanborn]

it takes the guy I use approximately 2 hours to blast a 81 style machine.  Thats using soda.  He charges me 200 for the job, but his normal rates are 150 per hour. 

[SIGNGUY]

I get all my blasting, body work and paint work done at one place... and it can vary obviosly from machine to macine and the amount of body work needed.. and trust me there is always body work needed, often hiddin until you get that first coat of primer on it..
I pay anywhere from 1200-1800 for all of it..

[Pat Pixley]

 I work withthe guys that do my Powder coating they also do media blasting then when they get the cabinet and all the other parts that need paint ready to go then that stuff goes off to my
painter body shop  but in the summer I will be doing my own media blasting.  Just found a blast cabinet (bigger)  I will be buying here soon and  also found a new blaster  ( bigger) so I will be able to do my own machines.

 John is right it does vary from machine to machine ,

[Slapshot42]

I also used a local powder coat  company.  It's a
$1.38 per minute.  They use a 70 grit, glass bead.  I paid $243.00 for sandblasting, primer, and powdercoating for a Westy WD-10.

As for paint it was about $50.00 a quart used atbout 1.5 quarts, plus ,sealer and primer.

[brasskey]

Thanks for all the help everyone.  There's no soda blasting in my area so it looks like sandblasting is my only option.  I'll see what I can find out.

[BrianS]

I would echo Tim's comments about being careful with sandblasting.  You don't want to warp the metal.  Would be worth double checking to see if a less abrasive media is available.

[Jim]

I also used a local powder coat  company. I paid $243.00 for sandblasting, primer, and powdercoating for a Westy WD-10.

That's a great price for sandblasting & powder-coating a WD-10! My only concern with powder-coating a machine is that it has to be perfect or the dents will show since you cannot have body work under powder-coating as I understand it...

[Slapshot42]

That's a great price for sandblasting & powder-coating a WD-10! My only concern with powder-coating a machine is that it has to be perfect or the dents will show since you cannot have body work under powder-coating as I understand it...

I had minor body work after the powdercoating.  So I had a few spots that broken into the powdercoating and primer.  I used a 2 part product for bodywork.

  They also sandblasted the air duct cover and all 4 product shelves included in the $243.00. along with powdercoat and primer.

  A normal 2 part product like I used would of melted during another session of powdercoating for red. My powdercoater said there is a a product that is available that can resist the heat of the oven for bodywork.  I will call and ask him.  I think it was called MetalX??

I did use a about 1.5 quarts of primer, blocked it, wet sanded it, than used a very nice paint sealer.  The prep work on that box plus body work is pushin close to 20 hours.

 The only regret was using a single stage paint.  ( This is before I knew about the site.)  The paint is not very hard, and when the box was cut and buffed it broke though the paint.  So had to scratch it and paint it again.