SMC Discussion Areas
November 23, 2024, 06:23:43 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1] 2 3  All   Go Down
  Print  
Author Topic: Calling all PRO's.... I got questions.  (Read 14725 times)
0 Members and 2 Guests are viewing this topic.
dodge2500
Newbie
*
Offline Offline

Posts: 29



« on: January 01, 2012, 05:45:22 am »

So I am restoring three machines right now and they are all my first. Everything is going well, but I have some questions about full restorations. I am trying to do these right the first time, so I can resell. Though I want to do these as close to their original manufactured state without hurting the resell value, I am trying to save a little money in the process. If they were for me I would not care. I appreciate everyones input in advance. I will be taking all advice seriously and can't wait to hear what you have to say about one, or all of these topics.

1. I have all of the trim, bezels, face plates, etc ready to be sent out and chrome plated. However, I have found reproduction bottle openers and such with chrome a finish for $7.50. Wouldn't buying this piece be cheaper then having the original chrome plated AND should I do this or stick with the original and pay the extra cash to have it re-chromed.

2. Powder Coating VS. Hammertone? I have to do three liners, and tons of other parts. I was thinking hammertone because it is cheaper, and I personally like the way it looks. Like I said though the machines are not for me, I just don't know the pro's and con's. Or are there any better options?

3. I am doing a V-23 and a C-51. When I got both of these they were all red. At one point the C-51 was white on top and red below, and I know some V-23's have a silver top. Should I paint these the same way I found them (all red), OR should I do something a little different but still original, to make them stand out?

4. And Lastly, Decals. Any kits?

I know that's a lot to ask, and I have read over the message board for like 6 hours now. Theres a lot of stuff from 5 years ago and the market, EPA laws, etc, have changed. Just wondering what your input is on one or all of these topics. Thanks a bunch again in advance.

Dave
Logged
RC kid
Soda Jerks
*****
Offline Offline

Posts: 1084



« Reply #1 on: January 01, 2012, 09:52:48 am »

For re-sale I would definitely buy the new chrome pieces and be done with it. But always save the old pieces.

Hamer tone is the way to go on the interior of the machine. It looks great and cost much less.

I would paint the C-51 all red just because I think this particular machine looks better in solid red than in white and red.

I would paint the 23 red and paint the top silver. It looks much sharper in this paint scheme.

The only real recommendation I would make is to pay attention to the details and not take any short cuts in prepping the machine for paint. I also recommend replacing all the screws with stainless steel screws.

Good luck.
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #2 on: January 01, 2012, 10:21:10 am »

      Ok, here is my opinion.
       I would also get the re-poped bezels and reduce the chrome plating costs.
       Powdercoating's main advantage is being chip resistant and liners don't get banged up too much, so I agree, go ahead and hammetone them.
       But the red and white paint scheme is nearly always favored by the general public so I'm pretty sure that would help sell the 51. The 23 only had the silver top on the deluxe embossed version, so I suggest you should stick to the all red. This is only my opinion though.
       You will find all the decal kits you need from Funtronics, a sponsor on this site. They provide excellent products and service.
       Lastly, the machines you are restoring are not the highest on the list of desireability for buyers, so be very conscious about keeping your costs under control. You will surely get discouraged if you don't make a profit and we don't want to lose you as a member here.
Logged

Glen
dodge2500
Newbie
*
Offline Offline

Posts: 29



« Reply #3 on: January 01, 2012, 04:35:11 pm »

Thanks for the quick responses Glen and RC Kid.

I will definitely buy the replacement parts then, I just wasn't sure if that was a big no-no.

Also, I guess I will be hammertoning the liners. When I do the liners on the 51 I also have the sprocket, ammo belt, etc. What should I do with the moving parts. They are in okay condition, but dirty and need something. I put a few pictures of the 51 before I took it apart, which is down below.

RC Kid. I like the all red on the 51 better too, but I think customers would like the red and white more. With the paint scheme on the 51 I have seen it in red and white, WITH and WITHOUT chrome trim and kick plate. Anyone know the correct RED and WHITE scheme (chrome or no chrome)?

Glen the V-23 is not a deluxe. I know it is not historically correct, BUT.... I just think it would sell quicker in silver. I guess I will ask you this way. Would you buy a V-23 (standard) with a silver top? Your answer will probably be my decision!

I know that these machines are not the most desirable,  but I got them for next to nothing. I already sold a third one once it is complete. That machine is funding the other two, and I figured doing all three at once will save some cash. Also they were all 99% complete and working. I am trying my hardest to keep my cost low, which I am asking you guys! If you have any other tips or tricks for resto or keeping costs low shoot them my way!

HAPPY NEW YEAR!
Dave

P.s. GLEN I am not going anywhere!  Cool



Logged
RC kid
Soda Jerks
*****
Offline Offline

Posts: 1084



« Reply #4 on: January 01, 2012, 05:41:34 pm »

I would hamertone the rollers and sprockets as well. Be careful with the smaller parts. I have had issues with some small parts when the paint is applied to liberally. Powder coating also adds material to parts that sometimes are made with specific tolerances in mind.

Yeah, I have to agree with everyone, most people (not me) prefer the white over red paint scheme. I am one of the few.

I like both the C-51 and the V-23 Coke machines. But as others well agree, they aren't the most sought after Soda Machines. The V-23 has little appeal as it isn't embossed. But I would still love to have one. Doing them all at the same time should save you on paint cost as there will be less waste.

I have set up shelves for particular machines in order to prevent the parts from getting mixed up. I place the machine in opposite corners of the garage floor and put the metal shelves next to them. As parts arrive (or return) I stack them on the shelves next to the machine they are intended to be used on.  It allows me to spread the parts out but not all over the garage. It works for me.



 
Logged
dodge2500
Newbie
*
Offline Offline

Posts: 29



« Reply #5 on: January 01, 2012, 06:18:25 pm »

Do I have to disassemble the ammo belt or just paint it how it sits? Same with the sprokets?
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #6 on: January 01, 2012, 07:00:55 pm »

       That ammo belt looks like a nightmare to disassemble, 2 pins in each carrier would be over 100 to remove. Spraying inside each may also be a hassle. But since they are aluminum (I believe), maybe sandblast the whole belt and if they look ok use them that way.
      You will find that when 2 toning, the biggest challenges are getting a nice straight dividing line, and doing it without a high buildup of that second color. You should be able to color sand the line and get a smooth transition of colors, but if you don't like the result, it's easy to cover up with the chrome dividing strip.
     As for the 23, silver never was one of Coca Cola's signature colors and I'm not sure why they even chose that over white for the deluxe . That being said........I hope others here will voice their opinion on this one.
Logged

Glen
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #7 on: January 01, 2012, 07:44:49 pm »

That ammo belt looks like a nightmare to disassemble, 2 pins in each carrier would be over 100 to remove. But since they are aluminum (I believe), maybe sandblast the whole belt and if they look ok use them that way.

Glen - I think there are only 51 pins too. I think it is all steel as well - I remember the belt being pretty darn heavy.
I'd take it apart and include all halves with any zinc plating or powdercoating jobs you have going.
« Last Edit: January 01, 2012, 07:46:32 pm by collecture » Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
RC kid
Soda Jerks
*****
Offline Offline

Posts: 1084



« Reply #8 on: January 01, 2012, 07:54:57 pm »

Pull the ammo belt out and hang/suspend it. Ensure the belt is spread out, you should be able to attack the painting from both sides which will allow ample coverage on the inside of the tubes.
Logged
dodge2500
Newbie
*
Offline Offline

Posts: 29



« Reply #9 on: January 01, 2012, 07:58:59 pm »

I know that the V-23 the model I have was painted on JUN 16, 1949. The date was stamped all over the inside.
That was 7 years before Coke went to red and white. Coke went to red and white in 1956. All the C-51's were produced 1952-1955. So originally the C-51's were all red. In 1956 when coke went from all red, to all red and white, they bought back a bunch of C-51's. Then they painted them red and white. Whats even more strange about the one I have, is someone then painted it all red again. So mine has been painted 3 different times, and the last person who painted it was a hack... it is purple in some spots...and the embossing looks like a 5 year old did it.
Just a little coke history I have come across. I just haven't been able to find out if the chrome trim and kick plate on the red and white one's are original or just something someone did. I don't want it to look to gaudy.
Logged
Pages: [1] 2 3  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!