SMC Discussion Areas
November 27, 2024, 10:28:41 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vendo 384?  (Read 4738 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: May 15, 2004, 11:55:42 pm »

I just purchased a Vendo 384 Seven-Up machine. My first soda machine ever, so pelase bare with me becuase I know nothing about these things. Quick qeustion, when I plug it in, the machine starts, then trips my circuit breaker on the house fuse/breaker panel. I noticed the former owner has several soda's in there that seemed to have burst and there is gooey syrup-ie liquid all over towards the bottom. Could that be the problem, or does this sound like something more serious? Thanks for your help!


Dan
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: May 16, 2004, 08:12:16 am »

Hi & Welcome!

First, make sure the outlet you're plugging into isn't overloaded with other devices, the machine should be plugged into a 15 amp circut, second, if the cans bursted inside the machine this could indicate a thermostat problem ( they froze)
if the syrup got all over the vending motor(s) they may be shorting out the machine, or more likely the Evaporators' fan motor's a good bet, they REALLY don't like getting soaked!

I'd start with the compressor, just unplug it from it's harness, & plug the machine back in & see if the breaker trips, if so, then the short's somewere else in the machine, if the breaker holds & the rest on the machines fans/lights/etc. come on then most likely the compressors locked up good  '<img'>  if it has a lightup- sign, you can also unplug its harness to further help isolate the trouble, just carfully start to work backwards & keep isolating the components of the machine,

Evaporator Fan ( inside fan)
Vending motors
Compressor deck
Light-up sign
wiring harness itself, (crushed. chaffed, cracked insulation, damaged plug, etc.)

carefully go at it step be step & you'll find it soon enough!
Just remember you are working around electricity on a machine with a pretty good short on it!  
 ':O'




Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #2 on: May 16, 2004, 10:53:29 am »

Here is another good response to a very common problem, and should be highlighted in our trouble-shooting section.
     In fact, with all the information flowing through this site, someone should publish a beginners guide. The number of first time soda machine owners seems to be rising each year.

                                                                         Glen




Logged

Glen
Guest
« Reply #3 on: May 17, 2004, 05:16:59 pm »

I will do that, thanks.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!