SMC Discussion Areas
November 23, 2024, 03:55:56 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > The Vending Rack > Swap Meet Area (Moderators: johnieG, Jim) > v-81b
Pages: [1] 2  All   Go Down
« previous next »
  Print  
Author Topic: v-81b  (Read 11078 times)
0 Members and 1 Guest are viewing this topic.
zadd
Soda Jerks
*****
Offline Offline

Posts: 933
« on: April 13, 2011, 09:19:06 pm »
Looking for the correct parts for my machine to fix this part someone cobbled in . (works) Let me know if you can help. Should be the spring loaded T. Thanks
« Last Edit: April 13, 2011, 09:21:40 pm by zadd » Logged
Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom
« Reply #1 on: April 13, 2011, 11:03:00 pm »
You can get a reproduction linkage from the sponsors.
Logged
Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
zadd
Soda Jerks
*****
Offline Offline

Posts: 933
« Reply #2 on: April 14, 2011, 06:36:21 am »
I can get the spring and T bar but unsure of what else is missing to connect those parts .
Logged
Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
zadd
Soda Jerks
*****
Offline Offline

Posts: 933
« Reply #3 on: April 14, 2011, 06:41:27 am »
I don't need the linkage I assume the parts I need are on the bottle door housing .
Logged
Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
BrianS
Soda Jerks
*****
Offline Offline

Posts: 731
« Reply #4 on: April 14, 2011, 11:34:11 pm »
Zadd,

Is this what you are looking for?  Its one of my pics to help me remember how to put my 81D back together once I get all the pieces back from replating. Hopefully your 81B has the same mechanism.  As I recall, Backet "A" mounts to the bottle door frame.  Pivot Arm "B" has a smaller diameter pin on the bottom side (not visible in pic) that fits into the hole on Bracket A.  Screw and washer "C" come in from the back side of Bracket "A" to hold the Pivot Arm in place.  Spring "D" slides over the Pivot Arm post and T-Bar "E" slides through the slot in the pivot arm post and is held in place by the spring.  At least I think that is how it goes.  Will find out for sure once I actually get to the reassemble part of the project.
Logged
Brian

Vendo 56 - restored
Vendo 81 - in progress
Vendo 39 - in the rough
Rockola 1428 - Original
1959 Williams Pinch Hitter
Wurlitzer 1400
1930 Koken Barber Pole
zadd
Soda Jerks
*****
Offline Offline

Posts: 933
« Reply #5 on: April 15, 2011, 06:24:34 am »
That's it ... Part B is what I need along with the t and spring . Atleast I know what it looks like now . Thanks  drinking
Logged
Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #6 on: April 15, 2011, 08:29:37 am »
It looks like on yours that "Rod" that the T bar and spring moutn to has been sheared off? cause it looks like the welded on a post onto your linkage?

I might have that part.. I''ve got a few 81's apart now for restoration so I'll look in my box of parts and see.. I know I had a few linkages in there for various machines , just have to see if they match up to the 81 linkage piece.

I don't believe that part is reproduced from any of our sponsors?  I'll look at this weekend.

John
Logged
Soda Machine Enthusiast since 1996!
zadd
Soda Jerks
*****
Offline Offline

Posts: 933
« Reply #7 on: April 15, 2011, 04:10:52 pm »
Thanks John . I'm will take apart the machine this weekend and get a better look at the linkage . Let me know .
Logged
Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
zadd
Soda Jerks
*****
Offline Offline

Posts: 933
« Reply #8 on: April 19, 2011, 08:51:34 pm »
The linkage was fine . I just need the barrel and bar with spring and the mounting hardware . Are the parts from a 110 work ?What woe be a fair price to pay for these parts ? Thanks
Logged
Zadd
Dr Pepper Queen Anne Bottle Machine
Dr Pepper Queen Anne Can Machine
7up Ideal 55 slider
Vendo 81D
VMC 33D
Nehi Pelco Koolie
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #9 on: April 20, 2011, 08:27:19 am »
Zadd,
Still havent found what I thought I had.. have to dig a little more .. should know yet tonight.

John
Logged
Soda Machine Enthusiast since 1996!
Pages: [1] 2  All   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!