Looking for a 5c rejector and the holder.

[Larry]

Does anyone have a 5c rejector and the base that the rejector attaches to?  The coin mech is 3.5 wide by 4 high.

It's for a 1950's Bally game.

[Jim]

I'll check over this weekend to see if I still have a couple of pinball mechs...
I know I do not have the mounting bracket.

[collecture]

I probably have both, but I'll have to check. What are the bracket's dimensions?
What is wrong with the one pictured?

[collecture]

Larry, I have this rejector, but no bracket; however, if you have a bracket, a copy (or reasonable facsimile) shouldn't be difficult to fabricate.

[Larry]

Sorry for not getting back.  Just got a new computer and it wouldn't let me log in.  I had to use my old name and password.  It took awhile to remember it.

I found a mech that should work.

The bracket in the picture is a guys machine in Wisconsin.  He sent me pictures awhile ago.

I'm waiting for dimension for the bracket and dimensions for a solenoid plunger from a fellow in New York.  I was hoping that I could use an existing bracket, but I will probably have to rig one up.  I have a Popperette bracket but it wont work.  I may just use a straight tube to feed the nickle to the playfield.  The nickle is actually used in the game. 

Thanks for looking.

[Jim]

Larry,

I apologize but cannot find the one or two I think I have...

[sodaworks]

I have three of these slug rejectors.