Houston repairman wanted

[wsjax4]

I have a machine that has a working motor but the compressor does not work. I purchased several parts for the machine online with the help of a retired repairman in North Carolina. One of them was some type of wiring harness for the compressor. It was a small investment and several people suggested I start there becasue of the small cost. However, I have no idea how to install it. I fully understand the problems with getting a commercial outfit to work on a 45 year old refrigeration unit that likely contains the old-type refrigerant. Therefore, I am looking for a repairman that works on these machines that lives in the Houston area. Can anyone help?

Many thanks.
Scott

[collecture]

One of the sponsors of this site is Global Compressors. Eric does a lot of work on these and would be more than happy to help you out. I believe he is located in New Braunsfels, TX, which is a little north of you (but not that far I don't think). He used to work in Houston a long time ago and may get down there now and then I don't know or ytou could take it up to him

What model machine are you needing repair of?

[wsjax4]

I'm hoping for someone closer as New Braunfels is 3 hours west of me.  The machine is a Vendolator, not a Vendo.  I sent pictures to anyone who would look at them and was finally told that the machine was originally a Pepsi machine as is evidenced by the powder blue paint that is visible on the inside.  I was told that the Coca-Cola folks bought a lot of machines from Pepsi in the late 60s/early 70s and refurbished them for their own use.  I bought the machine for a song because the guy had no key.  I have since drilled out the old lock and replaced it but there is no use in re-furbishing this unit.  I would like to get it running and sell it so I can buy another!  As you can see some jackass cut the frame on this one so I will need one of those as well.

[MoonDawg]

            Replacement of the wiring harness is not hard to do, once you remove the compressor (which is also very easy to do in all these early machines). Go ahead and give it a try........you can't hurt anything.

[cokecolaman]

I have a "frame" for your vending rack if you are interested. You can contact me at "cokecolaman@comcast.net"

Thanks,
Ron

[Pat Pixley]

Well as far as the compressor yeah Eric may be 3 hrs away but it will be done right the first time
other wise you could contact a local appliances repair man and hope he knows what he is doing and does not
screw something up or over charge you  or both.








 Just my two cents

[johnieG]

Now you know how to make your machine into a "free-vend" just get out the tin-snips and away you go! 

[David D]

Interesting, my first thought was they were trying to vend 2 liters bottles... Agreed Eric is very good

[wsjax4]

I have added some more pictures of the compressor itself.  It looks like someone has done some "work" already as there appear to be some pieces missing.  Can anyone confirm?

[collecture]

Looks like it is all there - you just need to wire it together; however, the relay and overload may or may not work. Worth a try though and, if not, just get a 3-in-1 hard start.