SMC Discussion Areas
November 26, 2024, 06:46:58 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Is Novus the best for this?  (Read 5278 times)
0 Members and 1 Guest are viewing this topic.
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« on: September 16, 2010, 11:11:26 pm »

As some of you are aware, I am restoring a WB60. I'll post a major thread when done with lots of pics
The inside of the bottle chute is sunburned and scratched up. You see the cleaned up (soap & water) chute in the pic below. Notice the darker (almost dirty look of the inside compared to the outside and even the bottom area, which was behind the bottle flapper.
What can I do to bring this back to life? I have some Novus, but haven't used any on it yet. I wanted to see what you guys do for this situation.
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
mznb1u
Soda Jerks
*****
Offline Offline

Posts: 3350


Those Who Stay Will be Champions!


« Reply #1 on: September 17, 2010, 05:59:15 am »

From the description on the Novus web-site, it sounds like that stuff might do the trick but I have never used it.  Have you attempted soaking the part in a bleach water solution for a little while - - maybe even overnight?  That might help get rid of some of the dirt and discoloration.

 drinking Tim drinking
Logged
loman4ec
Soda Jerks
*****
Offline Offline

Posts: 4768



« Reply #2 on: September 17, 2010, 06:59:35 am »

I think novus will help but if it is discolored it needs something else first. Novus is great for polishing plastic but it is not a stain remover. I would do both. Try the bleach water then buff it out with novus.
Logged
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #3 on: September 17, 2010, 07:47:32 am »

          The Novus and bleach might clean it up, it won't remove the scratches. Since the whole part has been molded with white plastic you should be able to use various grits of sandpaper to cut the surface then buff it smooth. Of course you would experiment on the outside first.
Logged

Glen
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #4 on: September 17, 2010, 08:37:21 am »

Agree with what has been said,
I'd try some soft scrub with bleach to remove the discoloration (Test it first). .if that does the trick, then I'd use a fine grit sandpaper and wet sand the scratches out if they are a problem.. once you get down to a super fine grit paper to get it smooth again, then try the polish (novis) or other plastic polish,, I have used Mothers Plastic polish with success before, but that was on clear plastic where it takes out the fogging of it? not sure what it'll do on white?

HOpe this helps

good luck,... now get to work! biggrin
Logged

Soda Machine Enthusiast since 1996!
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #5 on: September 17, 2010, 10:24:13 am »

Thanks guys! I'll test around a bit.
It is actually a light grey, but I am sure the color throughout.
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!