SMC Discussion Areas
November 27, 2024, 05:18:45 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vendo 80  (Read 4147 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: January 30, 2004, 07:02:52 pm »

CAN A VENDO 80 DISPENSE CANS??WHERE THEY ADJUSTABLE FOR BIGGER BOTTLES?? ':cool:'
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: January 30, 2004, 09:42:57 pm »

The Book, Jeff Walters 3rd edtion. says that " with some tinkering they are able to vend cans" but they where "designed for 6-1/2 oz bottles." (refillables) which are about the same length as the non returnable 8 oz. Coke bottles today
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6227



« Reply #2 on: January 31, 2004, 12:48:17 pm »

The Vendo 80 makes an excellent can machine. First the rubber rollers below the rack must be reduced in diameter by at least 1/8"
       I didn't want to take mine off so I tunned the whole rack upside down on the floor and used a 5" dia. sanding disc. With the disc spinning it turns the roller and removes the rubber.
       While the whole process is somewhat more than "a little tinkering" the machine becomes a lot more usefull, and it still vends the small bottles as before.
Logged

Glen
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!