Coin mech shaft lengths and pin hole locations

[loman4ec]

I am trying to get a database together of all of the shaft lengths for different machines. Mainly Vendo's and VMC however I need the others as well. I have a metal lathe so I can turn down any sizes that i need. I have found the correct thickness rod for vendo's rather cheap at the hardware store and I am now working on the shaft and coin slot on the shaft for a small door machine. Anyone that has this info please share. I need the length of the rear of the shaft of mechanical coin mechs from the back of the mech to the end of the shaft as well as where the pin hole is located and if it is vertical or horizontal.

On the large door/ small door conversion mech that I have the shaft length is 3 3/8 which is longer than a Vendo 81 so is that to a VMC 44? Any info anyone has will be greatly appreciated. I know the length of the V39 and Cav 51 for sire. Anything else I need to know.

thanks
Josh