Wanted: V63 front trim piece

[Dsndly5]

I need the trim piece that is on the face of the machine measuring 3-4" high by roughly 18" long. Any help locating will do. Thanks

[MoonDawg]

         I have one,  $35.00

         Also a nice coin door if anyone else needs one

[Dsndly5]

Thanks! Looks nice, however the picture is hard to see the detail. I'm looking for one that has no dents/dings/wavy metal. Also, the one you have looks to have the gold plating. Mine does not... it simply has the brushed aluminum. My model # is; H63b, not sure if this makes a difference.
Thanks again!

[Dsndly5]

Here's a picture of the part.

[zadd]

I have one in fair condition but not perfect . I could send pick if you like . It has one small ding and some gouges behind the coin return lever that might be able to be sanded out and polished . It is straight other than described  .

[Dsndly5]

If you have some pictures that would be great!

[Pat Pixley]

 Well if Zadd's does not work out I have one I may part with  Like Zadd's Mine had a ding and a few scratch's.
 
 Pat