V63 Vending part missing????

[jenkine]

I recently noticed on my V63 that there seems to be a part missing.  I knew the machine was set to free vend but I did not realize the part was missing until I got home.  Inside the cooler box and just below the bottom beverage dispensing hole, there is a square box that the electrical cord is connected to.  My machine seems to be missing that entire box, there is no electical cord running to that part of the machine.  The machine is cooling good and the drinks vend fine for free but what is the part and where would I get one?  The machine does have the electrical coin  mechanism inside the door.  I will try and attach a picture of this part from another machine.  Thanks!

[tkaz]

There are two screws on the front of that box, you should be able to take them off and pull the cover off to see whats behind it.  That is where the vend solenoid and linkage is normally.  Does the electrical cord that goes there attach to nothing?

[jenkine]

This picture is not my machine.  I was just trying to show what was missing on mine.  My machine is missing this entire box and no electricity is running to that part...Thanks.

[Pat Pixley]

I may have what you want  when I get home tonight I'll go take a look
and get back to you.

[jenkine]

Great.  Thanks.

[tkaz]

I guess it would help if I read the WHOLE post...

Here are some photos of what is underneath the box on a normal machine, I took them when I disassembled my V90

[Pat Pixley]

Ok is what your looking for What in tkaz 's photo's   and do you need a coin mech.

Can you post a picture of what you have the inside the  bottle rack mainly.

 

[jenkine]

I will take a pic of the inside of my machine tonight.....I do have a coin mech but I don't have a vend solenoid and some other parts I think.....

[jenkine]

here is a pic.....let me know what you think......

[jenkine]

another pic