SMC Discussion Areas
November 27, 2024, 04:11:29 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
SMC Discussion Areas > Trouble-Shooting > Refrigeration (Moderators: johnieG, Jim) > Cooling system
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Cooling system  (Read 5608 times)
0 Members and 1 Guest are viewing this topic.
Guest
« on: October 22, 2003, 04:59:50 pm »
Hello there...
I have a  wonderful old 4ft Coke box with a lid that opens up on both sides.
It cools, but only to 45deg.
I was wondering if this old gal has an adjustable thermostat?
Logged
Guest
« Reply #1 on: October 22, 2003, 09:00:29 pm »
Sorry, I forgot to mention that it is a Westinghouse WD12.

Thank's ':<img:'>
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #2 on: October 22, 2003, 09:07:57 pm »
The Thermostat is located inside the compressor area (rear) tucked up near the bottom left of the tank, you'll need to pull off the grill that covers the compressor compartment.
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Guest
« Reply #3 on: October 22, 2003, 09:35:20 pm »
Thank You Johnie! '<img'>
This sounds to be a pretty simple task once I get it mooooved into a workable position... lol  
 Any special tools or hazards I should be aware of?
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #4 on: October 23, 2003, 08:27:02 am »
Just the usual, moving fan blades,hot compressor case, etc, also the Thermostat should have a cover on the back, which sometimes is missing/removed, the wires on the back of the T-stat have 115 volts across them so just watch where you put your fingers  ':O' , it's got a knob (if it's original) or a sloted adjustment shaft like mine, colder=higher up in numbers ie:
"7" is colder than "4" , watch your temp in the bottle area as the air coming out of the top of the center fan/tower may freeze the bottles that are closest to it. hope it helps...JohnieG
Logged
Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Guest
« Reply #5 on: October 23, 2003, 10:56:57 am »
Sounds like I'll be right at home.... just like workin on my 66 MGB Rdstr...lol

Thanks again JohnieG ':<img:'>
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!