SMC Discussion Areas
July 01, 2024, 10:25:08 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Pop Machine in the garage  (Read 3925 times)
0 Members and 1 Guest are viewing this topic.
enzo
Guest
« on: November 28, 2007, 11:01:24 am »

I have a Vendo Pepsi(superstack).  I have it out in my garage which is insulated and never drops below 35 degrees in the winter.  My question is I would love to still use the pop machine but is there a way to turn off the cooling in the machine and just have the vending working?   Would all  have to do is turn the thermostat way up so it would never turn on in the winter and then turn it back down once it starts to warm up?


Thanks
Logged
collecture
Soda Jerks
*****
Offline Offline

Posts: 6959


Tom


« Reply #1 on: November 28, 2007, 11:46:56 am »

I am not specifically familiar with your particular model machine, but there should be a thermostat that you could turn to the off position. This would keep the compressor and condenser fan from running, which is most of the energy consumption. The evaporator fan inside would run continuously, but it has a nominal energy requirement.
Power should still run to the required vending components.
Logged

Cav 27, 33, CS-55E-2, 72
S-48 DP
Ideal CC 35, Barq's 55
1930s DP Counter Cooler
Vendo Coin Changers (ea. style - orig w/ stand)
Vendo Junior (rest.), 23 Deluxe, 39D, 44, 56RT, 80SS, 81A (orig), 81D, 6 C.V.
VMC 27, 27A, 81D DP, 110 DP
Westy WC-42-T, WC-44SK, WD-5(2), WB60
Victor C-14
bubba
Soda Jerks
*****
Offline Offline

Posts: 3021



« Reply #2 on: November 28, 2007, 12:08:26 pm »

I don't believe this idea will work. I turned my t-stat off on my basement machine 2 days ago as the machine is empty and not planning on using it for a week or so. I can't easily get to the power cord, so this was my next best thing. The air from the fan motor running inside the cabinet is enough to heat it up. I had 2 bottles left in my machine that were hot. Best bet is to leave the t-stat alone.. the cabinets are insulated as well.. outside air temp doesn't get into the machine.
Logged

Ken

V-63 -Bottles
2-Cavalier USS-64
VMC ST56B Royal Crown - being built
Vendo HA56C Coke
2-V63C DP
V63C Coke
U-Select-It 5cent candybar machine
SIGNGUY
Soda Jerks
*****
Offline Offline

Posts: 5442


Collector of Ol Smoothie Rootbeer


WWW
« Reply #3 on: November 28, 2007, 01:16:02 pm »

I made the same mistake on an 81 once... just wanted it plugged in to light up the door as it looks cool... but checked it a few days later and it was really warm inside... from the evaporater fan... if you could unhook that then it should work...
Logged

Soda Machine Enthusiast since 1996!
MoonDawg
Soda Jerks
*****
Offline Offline

Posts: 6224



« Reply #4 on: November 28, 2007, 01:25:59 pm »

       If the inside air temp is as cold as the outside temp, your
compressor will not have to work hard at all, minimal power consumption.
My sugestion is to leave the dial alone and enjoy ice cold drinks all year round  happydrinkers
Logged

Glen
Pat Pixley
Guest
« Reply #5 on: November 28, 2007, 02:37:14 pm »

I've always had a machine in the garage running year round and never
had a problem, And I have never shut down the T-stat , You have to
remember the unit's are insulated to keep the cool air in and hot out
or to keep the beverage from getting to cold and freezing up
( Some time you get one or two that may)  some of these are meant
for outside use even in the winter time.

Pat smile
Logged
Camel24hrs
Guest
« Reply #6 on: November 28, 2007, 07:59:23 pm »

If you shutdown your T-Stat unplug your evaporator fan motor.  It should be easy to do.  That way you will not generate any heat and your controls should still work.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!