Vendo 63 wiring

[greglough]

I've got two wires coming from the jones plug labled 5a and 6a
Attached diagram identifies them - can someone interpret and tell me where to connect these wires?

Thanks
Greg

[johnieG]

Wiring connections 5a & 6a are part of the cabinet harness plug, not the "Jones" plug ( which is for the coinmech.)

They connect through cabinet harnesses male plug (from the carrier switch) to the mating female socket of the door harness, and it allows a "ready to vend" signal to go to the coinmech to pull in the CREM relay(s) which allow the coinmech to accept coins.

they terminate on the "common" [C] and "normally closed" [NC] contacts of the carrier switch down by the vending solenoid.

[greglough]

Thank you for the reply - still having trouble locating the contacts you reference.

Can you identify on the attached pics?

[johnieG]

Nope, I cant, because your entire carrier switch is missing.  Please refer to the modified picture.

If you dont have a switch, you can temporarily connect the two wires together ( and insulate )to enable the coinmech to accept coins

fun fact, these wires have 120 volts on them, so be careful when connecting them to the ( missing) switch or together, unplug the machine first.

[cmike101]

Good work John..You are pretty good..

[johnieG]

So then , the check's in the mail?