SMC Discussion Areas
November 23, 2024, 06:09:53 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: USS-8-64 compressor question  (Read 4343 times)
0 Members and 1 Guest are viewing this topic.
kerran
Newbie
*
Offline Offline

Posts: 7



« on: April 21, 2012, 09:24:31 am »

Posted about my thermostat earlier and ordered a replacement.

I disconnected my existing thermostat and wanted to see if I still had a problem with it disconnected. When it was connected and I turned the temperature control knob to off and then back on sometimes I would hear several "clicks" before the compressor would come back on.  Along with these clicks I would hear the compressor make some noises (think of when you start a lawn mower before the engine kicks on).

I figured it was just the thermostat, but yesterday I decided to test that theory by just touching the two black wires together.  Sometimes it started right up other times it clicked a bunch and finally started up.

I understand this thing is 50 years old, but i'd like to be proactive rather than reactive. Is there something I can/should replace?
Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #1 on: April 21, 2012, 11:17:32 am »

your compressor is old & struggling to start, the clicking you hear is the overload device on the compressor itself turning the compressor on & off in an attempt to start it.  You can try a 3-in1 starter/booster & see if that helps, but if the compressor is really starting to go, it may not.   

search the refrigeration main topics for "3-in-1" as this has been covered before on many occasions
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
kerran
Newbie
*
Offline Offline

Posts: 7



« Reply #2 on: April 21, 2012, 12:27:12 pm »

Thanks for the insight johnieG.

Ive been tinkering around a bit this morning with it and noticed something interesting.  If I touch the two wires together it'll turn on. If I let the compressor run for a minute or so then turn it off and let it rest for a minute or two and then turn it back on, no problems with starting up.

When I had initially tested it I must not have given the compressor enough time to rest before turning it back on?  Does that make sense and/or provide some sort of information regarding the health of my compressor?

Logged
johnieG
Global Moderator
Soda Jerks
*****
Offline Offline

Posts: 5396


This is fine...everythings going to be OK....


WWW
« Reply #3 on: April 21, 2012, 04:50:45 pm »

Yes, if you try to turn a compressor on & off quickly it will stall due to the high pressure it has built up.
Logged

Spoon-feeding Newbies since 2001...Wink
Yeah..220,221 whatever it takes.
Remember, all it needs is a shot of Freon!
The Vendo V-83 is the '59 Edsel of the coke machine world. ;p
Spray painting does NOT restore a compressor
11 is louder than 10...
"Hope" is good, but it's not an action plan.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!